What did you do to your S550 Mustang today?!

[Gman]

I so tired of the 2016 ghey turn signal in the hood vents, I replaced the with stock ones :cheers:. I should have done this day one, not 2yrs later :headbonk:

It only took about 15mins tops to replace them.

Sponsored

 

[Rc18]

Purchased the raxiom red led ford gt style tails(if anyone is interested I'll be reselling the stock 18 tails next week. Pm me if interested, verified through PayPal&ebay 100% seller rating)custom smoked led reverse light with running light(should look killer with the gt style tails&rear diffuser, also hood struts

 

[Mustang530]

I so tired of the 2016 ghey turn signal in the hood vents, I replaced the with stock ones :cheers:. I should have done this day one, not 2yrs later :headbonk:

It only took about 15mins tops to replace them.

Wow an installed an ac outlet in the hood, impressive!

 

[Shane361]

Purchased the raxiom red led ford gt style tails(if anyone is interested I'll be reselling the stock 18 tails next week. Pm me if interested, verified through PayPal&ebay 100% seller rating)custom smoked led reverse light with running light(should look killer with the gt style tails&rear diffuser, also hood struts

Shame, I have some for sale...mint.

 

[Dr. Norts]

Picked my car up from steeda.ca today! What a difference it's like a new car. No more wheel hop and the car corners and drives amazing all around. Steering is so precise and the car is very predictable.

Parts installed:

Ford performance street handling pack
Steeda lateral & tension links
Steeda Bumpsteer kit
Steeda rear vertical links with poly bushings
Steeda front and rear sway bar end links
Steeda stop the hop starter kit

I'll post some pics of the car / stance later after I wash it and the 70 mph winds reside. Until then, boxes of the removed parts below lol.

Also had my car dynod while it was there. That dyno was done on the 91 octane tune since that was what I filled up with before I put it into storage last fall. I'm going to get another dyno with the 93 tune later on for comparison sake. Mods in sig.

 

[ivantwilliams]

I’m jealous. Now disappointed we have to wait for photos

 

[rum_punch_ruby]

Installed the remainder of my interior cf pieces that included steering wheel bezels, door grab handle, and the lower side pieces of the dash i had to send back from the initial order due to defects. Also found a decent cf piece for the steering wheel that wasn't just a thin sticker. Overall pleased with how it all came out. Only things i'm not 100% on initially are the door pieces so we'll see how I feel in a few months of living with them on.

And as soon as I got home I vacuumed the front driver carpet so don't kill me on that ;)

 

[Red Turtle]

Steeda clause came to me a few weeks ago too lol. Santa has been put out of business by steeda at my place! Picking the car up later today from steeda.ca where I had all the stuff installed.
Pics to follow.

:clap2:

 

[Calhoun]

Installed California Special splitter

Installed a California Special splitter on my '15 GT. I liked the more aggressive look. Not a hard job, just remove about 20 screws and a dozen or so plastic body tabs, switch out the splitters and reinstall all the screws and tabs. Took me about a couple of hours, but I'm sure someone good at this type of work could do it faster.

 

[Nagare]

Installed the remainder of my interior cf pieces that included steering wheel bezels, door grab handle, and the lower side pieces of the dash i had to send back from the initial order due to defects. Also found a decent cf piece for the steering wheel that wasn't just a thin sticker. Overall pleased with how it all came out. Only things i'm not 100% on initially are the door pieces so we'll see how I feel in a few months of living with them on.

And as soon as I got home I vacuumed the front driver carpet so don't kill me on that ;)

Are the door ones stick on or replacement? That's probably the part I'd want the most!

 

[Sway]

Installed a California Special splitter on my '15 GT. I liked the more aggressive look. Not a hard job, just remove about 20 screws and a dozen or so plastic body tabs, switch out the splitters and reinstall all the screws and tabs. Took me about a couple of hours, but I'm sure someone good at this type of work could do it faster.

Fixing to do the same actually, did you go to dealer and get one or buy online?

 

[rum_punch_ruby]

Are the door ones stick on or replacement? That's probably the part I'd want the most!

All overlays. There is a replacement option for the window switch panel too.

 

[Calhoun]

Fixing to do the same actually, did you go to dealer and get one or buy online?

I bought mine online last winter, from White Bear Lake Ford. At the time shipping rates were low but one of the threads about the splitter alerted me to the fact that shipping rates were going up.

 

[Houston Kid]

Got some goodies in. Thanks Steeda and Tasca. Looks like I have something to do Sunday.

 

[Dr. Norts]

Pics as promised.

Parts installed:

Ford performance street handling pack
Steeda lateral & tension links
Steeda Bumpsteer kit
Steeda rear vertical links with poly bushings
Steeda front and rear sway bar end links
Steeda stop the hop starter kit

Sponsored