Sponsored
HISSMAN
Large Member
- Joined
- Jun 10, 2016
- Threads
- 39
- Messages
- 2,992
- Reaction score
- 1,467
- Location
- West Virginia
- Vehicle(s)
- 2016 Oxford White GT/PP Premium
Added another Roush bit last night. It's on with VHB as well as 3M adhesion promoter. It will never come off. I decided not to drill. After it set for 12 hours I went out into the garage and put my weight on it...No budge..non.
ASarsano
Well-Known Member
Originally I tried just coloring each individual stich but found out that was way too time consuming I just laid the marker tip on the stitching and ran down the entire tow. Used a leather cleaner and it took the excess right off the leather. Then I went back with the tip and pushed it into the ends of each stick. Took about 3 coats over all for the red to fully coat the stitching. But the dye did I nice job ov getting absorbed through the stiches when I used heavy coats.
Sponsored
Moddiction
Well-Known Member
- Joined
- Oct 20, 2015
- Threads
- 82
- Messages
- 1,806
- Reaction score
- 341
- Location
- Mooresville, NC
- Vehicle(s)
- 2016 Mustang GT PP
Just finished installing my Katzkin seats. Tuscany leather and sapphire suedezkin inserts.
GTRacerX
Active Member
Ordered a Set of VMB5 Wheels, Hankook Tires (265/35/20 Front, 305/35/20 Back), Steeda Ultralight Linears, and now making up my mind on dampeners.... no mods did not last long. Pics once everything is in!
rvlyssup
Vag...Gun...Stang-NUT
- Joined
- Apr 11, 2015
- Threads
- 104
- Messages
- 1,233
- Reaction score
- 449
- Location
- Palmdale...The High Desert of SoCal.
- First Name
- Rand
- Vehicle(s)
- Lotsa...
Replaced my decklid emblem.
Someone actually stole my plastidipped GT emblem. Whomever took it also damaged the applique material causing multiple spider cracks along with a few light scratch marks. Probably used a pry tool of sorts. I found an emblem that covered most of the cracks. I still have a couple of barely visible ones running off each side of the emblem.
Gonna leave this one chrome to add some balance back there.
Someone actually stole my plastidipped GT emblem. Whomever took it also damaged the applique material causing multiple spider cracks along with a few light scratch marks. Probably used a pry tool of sorts. I found an emblem that covered most of the cracks. I still have a couple of barely visible ones running off each side of the emblem.
Gonna leave this one chrome to add some balance back there.
Last edited:
kapiteinlangzaam
Well-Known Member
- Joined
- Jan 26, 2016
- Threads
- 125
- Messages
- 1,871
- Reaction score
- 717
- Location
- Netherlands
- Vehicle(s)
- 5.0 GT Coupe 6MT PP1
Roush spoiler and US format plate. Not really legal here in The Netherlands, but I dont think ill have any problems....
Sponsored
Moddiction
Well-Known Member
- Joined
- Oct 20, 2015
- Threads
- 82
- Messages
- 1,806
- Reaction score
- 341
- Location
- Mooresville, NC
- Vehicle(s)
- 2016 Mustang GT PP
I'm an authorized Katzkin dealer so my pricing would be different but if you wanted to buy a set just like mine I could sell it for $685 plus shipping.
Pricing starts are $625 a set plus shipping for single tone regular leather.
it includes front and rear seats as well as door inserts.
gojensen
Well-Known Member
I actually like that
Where'd you find that? Or did you swap out the entire decklid for the 50th AP one? It looks a bit flatter than the ones we get over here in Europe - and I always wanted a 50th AP car Soooo sad I couldn't get those embossed 50th seats :(
tcman54
Stanghead
- Joined
- Apr 11, 2016
- Threads
- 167
- Messages
- 1,520
- Reaction score
- 787
- Location
- Palm Coast, FL
- First Name
- Terry
- Vehicle(s)
- 2016 Ecoboost
- Vehicle Showcase
- 1
Went to home depot and hauled about 15 pieces of sod home in the trunk, the car felt really buttoned down in the back, seemed like a more confident ride.
Terry
Terry
