Aggressive Fitment Thread

[Terminator2]

Holy shit! These cars have a lot of room to grow, apparently!!

Thanks, man. Test fit on stock suspension is going to be fun, I think!

Yes there is a lot of room in there especially if you get the perfect offset. A 13-14" wide wheel is possible in the rear with the right width tire and perfect offset wheel.

Sponsored

 

[tcman54]

Too aggressive?

 

[Terminator2]

Too aggressive?

:lol:what's sad is there are 2015 and up mustangs on 26s and other horrible setups.

 

[Terminator2]

With 10.5ET25s my front wheel to strut has around 5/8" (about 15-16mm) inboard clearance measured using the measured width of my finger (tire has a bit more than 3/4" clearance due to stretch) but it's impossible to photograph unless I put up on a drive on lift. An 11" wide wheel with a 285 possibly a 295 tire seems possible on the front with stock struts (Coilovers and cortex offset struts give more room) and no body mods but offset must be perfect around +31 to +29 and it would be very close to the strut around 6-7mm from it if my math is correct. An 11 ET30 will have the same (within 1.5mm) backspace (inset) as a 10 ET40 and there are many guys with 10 ET40s on front that have cleared the factory struts.

 

[Need4SpeedMotors]

Too aggressive?

way too aggressive

 

[Stage_3]

Too aggressive?

HA HAAAAAAAAAAAAA
Aggressively gay! :lol:

 

[Niz55]

Mrr 350 with 12mm spacers all around.

275-35-19/305-35-19 Mpss

-1.7R and -1.5F. Sportlines

 

[dwongger]

Individ Concepts step lip with titanium brushed centers

Fronts 20 x 10 Nitto 555 g2 275/30
Rears 20 x 11 Nitto 555 G2305/30

 

[Aarron_M]

Looks great, but pretty standard.... 404error aggressive not found.

 

[DB83]

I think we need an aggressive reset button, because it's definitely starting to get watered down.

 

[Highvoltage16]

Steeda ultralites and CCW DS 570s 20x9 +25 and 20x10.5 +48. Fit as flush as possible.

 

[David@Steeda]

[MENTION=19816]Highvoltage16[/MENTION] that looks fantastic!

 

[mumbles]

Individ Concepts step lip with titanium brushed centers

Fronts 20 x 10 Nitto 555 g2 275/30
Rears 20 x 11 Nitto 555 G2305/30

Wheels look great, nice choice!

 

[mumbles]

@Highvoltage16 that looks fantastic!

Agreed!

 

[RubyRed15]

Steeda ultralites and CCW DS 570s 20x9 +25 and 20x10.5 +48. Fit as flush as possible.

I can't find these wheels on the Steeda site. Where can I find details?

Sponsored