- Thread starter
- Banned
- #16
Yes, more than likely carbon fiber.Will this also be carbon fiber? Or will it be available in black?
Sponsored
Yes, more than likely carbon fiber.Will this also be carbon fiber? Or will it be available in black?
why is it that every single spoiler made for this car has so many odd raised or cut out areas? i wish i could explain it more clearly...the stock gt spoiler that has raised ends, the cdc spoiler with the lowered center section, the roush spoilers with the center section of the top sunk down an inch. trucarbon with the raised center section. this one with an extra vertical lip on the top blade edge and a raised center section. the track pack with missing end pieces and a raised hump on the lower decklid area. is anyone going to make an extended stock appearing spoiler similar to the 03/04 cobra?
i completely understand that it needs to be raised a little for the play in the trunk when its being closed...but a few mm is understandable. nearly an inch is just ridiculous.The raised edges are to clear the quarter panels. The spoilers hang over the sides of the trunk and you can't make a spoiler completely flush. If you do you run the risk of damaging the paint on the quarter panels and the spoiler.
If you google images of the Z28, you can see daylight between the spoiler and the rear haunches.i completely understand that it needs to be raised a little for the play in the trunk when its being closed...but a few mm is understandable. nearly an inch is just ridiculous.
I get it with the notches in the center. That is what has held me back from making a purchase, and makes me lean more towards a dovetail shape but those can be a bit much as well.why is it that every single spoiler made for this car has so many odd raised or cut out areas? i wish i could explain it more clearly...the stock gt spoiler that has raised ends, the cdc spoiler with the lowered center section, the roush spoilers with the center section of the top sunk down an inch. trucarbon with the raised center section. this one with an extra vertical lip on the top blade edge and a raised center section. the track pack with missing end pieces and a raised hump on the lower decklid area. is anyone going to make an extended stock appearing spoiler similar to the 03/04 cobra?