What did you do to your S550 Mustang today?!

[Polski]

Mine didn't come with a spare in the first place, just the inflator kit. Which I didn't have in the car anyway as I'm planning on installing an air suspension setup in the well.

Second time I've had to use this company and they've been great both times. It was driven up onto the rollback and not pulled, so I'm fine with it.



They're definitely 15-17.

I had a spare tire in my 2015 GT so I took it out to use on my 2019 PP2... and it doesn't clear Bremob's. Don't want tot deal with a spacer on the side of the road , so I got a full size 19x8.5 with a 255 tire. Will save some time if there's a need for a roadside service ;)

Sponsored

 

[FLfree]

I had a spare tire in my 2015 GT so I took it out to use on my 2019 PP2... and it doesn't clear Bremob's. Don't want tot deal with a spacer on the side of the road , so I got a full size 19x8.5 with a 255 tire. Will save some time if there's a need for a roadside service ;)

 

[FLfree]

Added some Alcantara, Carbon Fiber and some other goodies to the interior!

 

[JStrib]

Ugg

I have my 15’ on jacks/blocks still from last weeks new 3” Borla S kit and decided to chage all fluids,, so waiting tranny/rear fluid and keep contemplating doing LT’s

lol..but I told myself , just a few mods and no race car/foxbody day stuff..lol

well P1x kit in house and exhaust..;)

How much of a hitch is it?
how many hours in it?

Im just looking for someone to sell me on it , lol..
any deals out there right now?

It was quite the job, but a lot of it came down to not having the exact tools I needed and waiting for them to be delivered. E8 socket and ratcheting wrench was the ticket for me. And committing to removing all studs on the passenger side. Aside from that it wasn't too bad.

Time wise my car was on jack stands for about a week and a half...But I never got the chance to work on it for more than a couple hours at a time for sake of kids, family, work, etc. All in all I would guess about 10 hours?

Deal wise I think Lethal was selling Stainless Powers for $7xx shipped. Not sure if that's still going or not.

 

[nustang]

Added some Alcantara, Carbon Fiber and some other goodies to the interior!

The alcantara dash bits a kit? looks great

 

[Crayon]

Drove to Boulder today.

 

[Crowd.Slayer]

Installed the CS style upper and lower grille in gloss black. Fits in much nicer with all the other gloss black pieces.

 

[Vertex]

Aren't those 2015-2017 taillights? They make 2018+

I believe they fit up to current year, 2022. Fit perfectly into the car without any issue other than the connectors needing a little more pressure to seat in properly compared to oem. Other than that perfect fit.

 

[Bikeman315]

4+ hours of Spring cleaning.

 

[GTP]

 

[rxryanm]

Fortunately it’s just a flat, I’m working from home this week, got spares in a storage building, and roommates that’ll let me borrow their cars. But I don’t want to have to do this again.

Well this immediately has become less fun. Good thing I have summer wheels waiting in storage too.

 

[Hadelson]

Checked both Catch cans. Passenger side just a little wet with oil and the Drivers side clear. That Said, most of my WOT are 2-3-4 hits and not often.

 

[Virnman]

Decided to swap out the factory 3.5’s made out of tissue paper with some JBL’s. Night & day difference & I haven’t turned off the EQ in Forscan yet.

 

[YBLEHSGT350R]

Interested in this process.

 

[ice445]

Decided to swap out the factory 3.5’s made out of tissue paper with some JBL’s. Night & day difference & I haven’t turned off the EQ in Forscan yet.

I wanna do this but I'm terrified of creating new rattles later, lol. I guess you can just order and replace all the clips you unseat. FYI some people think that center speaker ruins the soundstage, try unplugging it to see if you like it better gone.

Sponsored