TPMS sensor lead time.

[UPRSteve]

I didnt think they would work but they do.

Sponsored

 

[bvdawg13]

I have ITM sensors on mine, 315MHZ

 

[drabon74]

End of May is the current eta

Steeda has aftermarket ones but they are 200 for a set.

Wow, $200? Over double the price for OEM? Are theirs better somehow or are they gouging because of the shortage?

 

[robmustang201528]

Cant we just take the TPMS sensor out of the stock tires and put them in the new tires?

 

[UPRSteve]

Cant we just take the TPMS sensor out of the stock tires and put them in the new tires?

Yes. I know plenty of people who did this

I also did this with my 13. Which again is the same ones on my 15.

 

[robmustang201528]

Thanks

 

[David@Steeda]

Wow, $200? Over double the price for OEM? Are theirs better somehow or are they gouging because of the shortage?

When we originally listed the 2015 TPMS our cost was a little higher - just checked with my team and our cost has since decreased! The new pricing is $39.95 per TPMS and these are 40% lighter than OE - every bit counts right?! ;)

Plain: http://www.steeda.com/oro-tek-s550-mustang-tpms-sensors-2015-all-351-osc-f2ga-a/

Black: http://www.steeda.com/oro-tek-s550-mustang-black-tpms-sensors-2015-all-351-osc-f2ga-b/

 

[bvdawg13]

Well I gotta say I paid more than that, not from Steeda,. I wanted to make sure I did things right on a new car like this and I wanted black stems. I was told you can reuse the stock ones but part of the clip or something breaks when you remove them, so something might need corrected .

 

[USPSALIMITED]

Wow, $200? Over double the price for OEM? Are theirs better somehow or are they gouging because of the shortage?

The exact same shit for a BMW would run you $350.

(Whenever I feel pain about mustang aftermarket or oem prices I look at what I would have paid if I had gone for an M235 instead. It helps)

 

[Lagometer]

Probably aftermarket, universal sensors, drabon74.

 

[Carbon Driven]

How about retraining the sensors?

 

[Lagometer]

The tire shop reused my original sensors on my new tires, today. Everything works like it should. They required a service kit, o-rings, etc.

 

[Youngmustang]

So along with the TPMS you need the programming tool as well?

 

[Carbon Driven]

Nope, the shop that did mine just swapped over the sensors and I was good to go

 

[smdandb2]

Does anyone know if there are any barrel mounted TPMS sensors we can use? I don't want to use valve stem mounting ones on my new wheels.

Sponsored