Check for the insert that is shipped already added to it and remove it if you are tuned for the full size.Any feedback on what the "kinks" were with the setup and tune? Just curious, should be pretty straightforward as an airbox lid, filter and tun, unless related to other mods you also have.
In addition apparently there is some maf turbulence, at least in my case according to logs. No biggie on straight gas or e but could cause problems going back to flex. May add insert back and log and see if that calms it down and go from there. If that does not then... hmmm...Check for the insert that is shipped already added to it and remove it if you are tuned for the full size.
Check for possible vacuum leaks. In my case a line came loose that should not have.
Log and revise for maf curve. Win.
The maf looks too close to the filter. I personally think it should be moved back another 2"In addition apparently there is some maf turbulence, at least in my case according to logs. No biggie on straight gas or e but could cause problems going back to flex. May add insert back and log and see if that calms it down and go from there. If that does not then... hmmm...
That's actually what Shaun was saying was possibly contributing, though he didn't speculate the required distance to increase lol.The maf looks too close to the filter. I personally think it should be moved back another 2"