Starting the twin install...

[z06psi]

Debating on dumping the procharger for this setup myself.

:headbonk::headbonk::headbonk: Stock motor can only go so far...LOL

Sponsored

 

[Barrel]

Debating on dumping the procharger for this setup myself.

That's deep.

 

[Process]

:headbonk::headbonk::headbonk: Stock motor can only go so far...LOL

That's deep.

Who is to say I'll push the power more. Perhaps I just like the fit and finish

 

[Kryckter]

Who is to say I'll push the power more. Perhaps I just like the fit and finish

And the looks... And the sound... Yes the sound:hail:

 

[lobe50]

looks awesome, nice work.
curious on dyno #'s

 

[Travis@boostworks]

I went with the AEM Truboost...



Over the weekend I got the car finished up and going again. With the boost controller now I turned it up to 8-9lbs and did some logging. It also helps now that I have a wideband O2 that is downstream from the turbos to get accurate AFR numbers. The tune was just a little off so I sent some logs over and awaiting the re-tune. It was night and day difference from 6lbs to 9lbs!!! Its ALOT faster...

Just waiting the retune and some more logging to make sure it is all good to go. Then some more vids and dyno numbers will follow

And a picture just to keep the thread interesting. The car is anxiously awaiting a new tune.

Curious to what the ground clearance looks like on the down-pipes.. Can you snap a pic under the car? Looks like you have it lowered a tad, too?

 

[esacteksab]

Debating on dumping the procharger for this setup myself.

Wow! Didn't see that coming.

 

[Kryckter]

looks awesome, nice work.
curious on dyno #'s

Thanks! I turned it up to 10 lbs. last night and did some logging. Everything looks good. I should be getting it dyno'd within the week

Curious to what the ground clearance looks like on the down-pipes.. Can you snap a pic under the car? Looks like you have it lowered a tad, too?

It's not as bad as I was expecting. I am lowered on the Eibach Pro-Kit springs, and then with the weight of the kit on the front it brought the front down a little more. I haven't hit them yet...

And I tried to take a photo a bit out even with the front bug shield thing. Its pretty much the same height as it...

 

[spdbydesign]

Thanks! I turned it up to 10 lbs. last night and did some logging. Everything looks good. I should be getting it dyno'd within the week



It's not as bad as I was expecting. I am lowered on the Eibach Pro-Kit springs, and then with the weight of the kit on the front it brought the front down a little more. I haven't hit them yet...

And I tried to take a photo a bit out even with the front bug shield thing. Its pretty much the same height as it...

Could you measure with a ruler how much ground clearance you have and take a pic?

Can't wait to hear what you make, congrats man!

Are you on pump gas? E85 Ethanol?

 

[Kryckter]

Could you measure with a ruler how much ground clearance you have and take a pic?

Can't wait to hear what you make, congrats man!

Are you on pump gas? E85 Ethanol?

I'll try to get a picture with a measurement this evening.

It's on pump gas with Torco - Pretty conservative tune still...

 

[H35]

I made 714 rwhp with my Hellion kit using the 62mm turbos. That was at 10psi, pump gas, automatic, 20" wheels

 

[spdbydesign]

I made 714 rwhp with my Hellion kit using the 62mm turbos. That was at 12psi, pump gas, automatic, 20" wheels

Nice, stock converter?

 

[H35]

Yes, stock converter.

I'm putting in my Circle D 3600 next week!!

 

[Barrel]

Do have the graph handy? Would love to see the tq curve.

 

[matrix243]

Is it recommended running the auto over the man.?

Sponsored