performance springs with no drop

[thornclaw]

is there a performance spring available
with no drop?
i have a nonpp gt and the only option i can find are pp springs which are only a very mild increase in rates

Sponsored

 

[Jonyxz]

https://www.mustang6g.com/forums/threads/minimal-drop-springs-bmr-vs-steeda.142023/

 

[NightmareMoon]

Swaybars and stiffer shocks, or min drop spring w/ spring spacers.

 

[Dana Pants]

GT350 springs have the same front and a slightly higher rear spring rates than steeda and would be my first choice (until someone links something even stiffer)

BMR front rate is too low IMO coming pretty close to a PP1 spring rate.

 

[Bluemustang]

Nope. It doesn't exist. Go here: https://www.mustang6g.com/forums/threads/gt350r-springs-for-gt-high-rate-minimum-lowering.67003/
This contains your best answer.

 

[Elp_jc]

Define what you want to accomplish. I'd think either PP1 or PP2 springs should be enough... unless you want to build a race car . As mentioned, you can complement springs with sway bars, shocks, and chassis stiffening. Good luck.

 

[rucus0101]

is there a performance spring available
with no drop?
i have a nonpp gt and the only option i can find are pp springs which are only a very mild increase in rates

I used the Steeda springs along with their spacer kits. Drop was 5/8 front and 1/2 inch in back. It's really not much of a drop. Its just enough to be noticable but not so bad that you are bottoming out everywhere.


Matt

Sponsored