Paxton on the Dyno!

[dsp4848]

I've been meaning to post this for a while, but at the end of March I went to the dyno with a buddy of mine and here's my results:

Pull 1: 633 HP / 498 TQ
Pull 2: 632 HP / 501 TQ
Pull 3: 633 HP / 496 TQ
Temp: 91F
Pressure: 29.05 in Hg
Humidity: 33%

Overall, I was very impressed with the results. The results were pretty much exactly what I was expecting. My mods are in my sig below.

Unfortunately, the guys at the dyno shop couldn't get a signal for the RPM, but I do have a file with all the data points and was able to graph these pulls vs RPM in Excel.

Here's links to the 3 pulls:
[ame]
[ame]
[ame]

Sponsored

 

[SolarFlare]

Great numbers. Torque looks pretty flat.

 

[blkstang50]

Who are you tuned by? Same setup, I was on a low reading dyno as well

 

[AJ ROJO]

Man that trq curve looks like a table top! great numbers for sure!

 

[dsp4848]

Who are you tuned by? Same setup, I was on a low reading dyno as well

Lund. Wow, 684/546 is stout for the same setup. Are you still on stock headers and 93 octane? Not sure if the dyno I went to reads high or low typically.

Man that trq curve looks like a table top! great numbers for sure!

Thanks! Yeah I was impressed by the torque curve too, love that table top look.

 

[blkstang50]

Lund. Wow, 684/546 is stout for the same setup. Are you still on stock headers and 93 octane?

No I have full exhaust, jlt intake, manual rob shoemaker tuned

 

[dsp4848]

Lund. Wow, 684/546 is stout for the same setup. Are you still on stock headers and 93 octane?

No I have full exhaust, jlt intake, manual rob shoemaker tuned

Ah, yeah if you have headers then your numbers make sense. I'm still on factory headers and cats.

 

[Tammaro21]

Wow, I feel really good about my numbers then, Paxton 3.8 pulley on a dyno dynamics dyno, it put down 650hp and 530 tq here in phx with 91 octane, Lund tuned.

 

[Ponderthis]

Cool my old car made 629whp on a 3.6 pulley and 14deg advance 93 octane, octanium + 19-20deg will get you 650-660

 

[JadedGT]

Nice looking chart and good numbers.

 

[beefcake]

nice,

and i don't get too hung up on numbers, every dyno is different

get that bad boy to the track now!

 

[RidetechJosh]

Sweet!

Sponsored