Official Square Setup Picture / Specs / Handling Characteristics Thread

[Quiksilver15]

Thats the exact combination i was looking to get! Did you have to cut the bumpstops even with the minimal drop front springs? How are you liking them so far?

Sent from my SM-N9200 using Tapatalk

The ride is awesome, a little bouncy on the Houston highways, but that's more a damper issue. I'm running PP struts and shocks, and BMR Cradle lockout kit too. Car handles amazingly. Yes I did trim the front and rear bump stops.

Sponsored

 

[DoingOK]

Got the Airlift system installed with my 285x35x20 square setup.

 

[ponie1992]

Got the Airlift system installed with my 285x35x20 square setup.

Sick!

Jeremy
2016 Ruby Red PP GT

 

[daltron]

Getting MPSS 295/30/19 on my 19x10 +45 MMD Axim's today. Figure they won't fit, so I'll leave them at the tire shop until my AM 1" spacers come this week. Excited for a much beefier squared fit.

 

[Built4Speed]

Boss 302S 19x10 wheels with 285/35r19 Continental Extreme Contact DW tires.
+47.5 offset with 5mm hubcentric spacers all around. It's very close, like 1-2mm of clearance from the strut. I will be fitting a set of 7mm spacer up front to check my comfort level on the lug nuts.

[MENTION=19737]QuickSilver[/MENTION]15

Did you get the 7mm spacers and check fit w/ the stock wheel studs?

 

[JerzysIS6g]

Niche Misano 20x10.5 ET30
Continental DWS 275/35/20
Lowered on vogtland sport plus springs
No fitment issues or rubbing
Handling is great with that extra grip up front!

 

[Quiksilver15]

[MENTION=19737]QuickSilver[/MENTION]15

Did you get the 7mm spacers and check fit w/ the stock wheel studs?

[MENTION=21907]Built4Speed[/MENTION] No I never did try 7mm spacers, the 5mm are working just fine. Don't plan to switch them out at this time.

 

[hemistar1]

Winter setup still available at tire rack

Spring is here and I went back to my summer tires and OE pp wheels. DURING the mild winters in HamptonRoads I went with 20 in 8.5 in HOTCHKIS rim and tires.

Paid $99 each at tire rack and they cleared the Brembos nicely.I also mounted 20 in Goodyear Eagle sport all seaon ..265/40/20..paid about 140 each..

Really nice inexpensive setup..probably run again in November. Got TPMS from American muscle..came with sync..tool but did not even need it.

Square all around for winter and back to staggering during spring.

 

[Plimmer]

Forgestar CF10's 19x11 with 305/30's.
No issues at all, works great. Street handling is great, with a little tram lining, hope to do a track day soon to see how they do when pushed to the limit.

 

[Cloak]

[MENTION=15674]Plimmer[/MENTION] wow that is some meat! whats the offset on wheels, and what springs/coils are you on?

 

[Schu]

:amen:

Forgestar CF10's 19x11 with 305/30's.
No issues at all, works great. Street handling is great, with a little tram lining, hope to do a track day soon to see how they do when pushed to the limit.

Magnificent... perfect really. What are the exact specz on the rims and tires please? Are those the deep concave or semi concave? What offset?
What suspension are you running and what camber settings?

 

[solshinobi]

[MENTION=15674]Plimmer[/MENTION] That looks great!

 

[Need4SpeedMotors]

We did a special setup for Plimmer and he did the rest, it came out amazing!

 

[Cascadia_302]

Thanks! How did the SPC camber bolts you bought from me work out for you?

Haven't purchased my springs yet so they're just waiting for me to get off my ass and make it happen.

 

[Need4SpeedMotors]

Haven't purchased my springs yet so they're just waiting for me to get off my ass and make it happen.

get the springs brotha lol

Sponsored