Modifying As-Built Data Guide

[Buldawg76]

I have my color set to red to match my car and just checked and the door sills are in fact red as well, had a brain fart when I replied. The mirror puddle lamps are white though and do not change with my color.

I have no clue how to find as built data or the BCM-B part number.

I believe the non premium and or non digital dash models do not have my color but not sure either. Mine is a premium with digital dash.

BD

Sponsored

 

[HoosierDaddy]

I believe the non premium and or non digital dash models do not have my color but not sure either. Mine is a premium with digital dash.

FWIW I recall reading that installing a premium dash (before digital) adds Mycolor. Of course you needed lights that also supported it. Maybe/probably? the same with the digital premium dash?

 

[BlownGP]

Anyways to add the proximity approach greeting lights like the 2024+ have? and actually other fords?

 

[JJC]

Hey all, new to this forum.

I have a 2018 Mustang GT Premium with the 9 spkr sound system. It didn't come with a subwoofer but after some research, I found the car was pre-wired for it and had all the mounting holes for the bracket.
I have since installed the bracket, harness and shaker subwoofer but, the stock head unit doesn't seem to be recognizing it.
Is there something in one of the modules that needs to be changed with Forscan?
Has anyone else done this and had any issues?
I went with the stock system because it was significantly cheaper than aftermarket, fits perfectly and doesnt take up the entire trunk.

 

[First5oh]

Interested if anyone figured out how to change the turbo boost gauge (for ecoboost/GT's) into the supercharger boost gauge from the GT500s on the dash cluster.

supercharger/gt500:

ecoboost / gt:

Were you ever able to locate the line code for this option? Would love to have the gt500 gauge on my cluster.

 

[Top Fuel Friday]

Were you ever able to locate the line code for this option? Would love to have the gt500 gauge on my cluster.

Unfortunately no, I took a slightly different approach to get it and sold my Mach1 to pickup a '22 GT500

 

[First5oh]

Unfortunately no, I took a slightly different approach to get it and sold my Mach1 to pickup a '22 GT500

Wow. Beautiful car! I would love to trade up to a GT500 one day!!

 

[ScubaSteve2020]

Unfortunately no, I took a slightly different approach to get it and sold my Mach1 to pickup a '22 GT500

Well wow! What a way to solve a challenge

 

[jputnam]

Unfortunately no, I took a slightly different approach to get it and sold my Mach1 to pickup a '22 GT500

Wow that is a beautiful car. I'm sorry, but Ferrari has nothing on this. Ford wins again.

 

[Timry2]

Good evening, I have a 650, and I know this is the 550 site, but I haven’t been able to get an answer on the 650 site. I have a 650, performances pack, AE, magnaride. I want to add the oem differential cooler and I am trying to find the settings to activate it through forscan. I cant seem to find anything in the modules to activate the pump. Do I need to reprogram the bcm modules. What ami missing. Thanks.

 

[SnowFox]

Wow that is a beautiful car. I'm sorry, but Ferrari has nothing on this. Ford wins again.

 

[G.T.]

Thanks @AngelDeath and @fionic for this thread and the info in it!

Just got Forscan running and was able to do the changes I wanted (fogs on with turn signals and high beam).

Gotta admit there was some pucker at the fogs/turn signal part when there was a check sum error notification though, lol!

 

[FMLAExpert]

So on the subject of fog lights - on a S550 401A, is it possible in Forscan to have the fogs come on when the switch itself is off? Cause, when set to the parking light setting, the fogs come on, so it doesn't seem dependent on the low beams being on, but for the life of me I haven't been able to get them to come on when the lights are all "off" and its only the tri bar DRLs.

Is that even possible?

 

[mwa54300]

Hello, is it possible to fold the mirrors when locking the car and also to tilt them when reversing on a European version?(The mirrors have a button for manual folding.)

Is it also possible to add easy entry to a model that isn't equipped with seat memory?

Thank you

 

[ScubaSteve2020]

Hello, is it possible to fold the mirrors when locking the car and also to tilt them when reversing on a European version?(The mirrors have a button for manual folding.)

Is it also possible to add easy entry to a model that isn't equipped with seat memory?

Thank you

I looked at this for quite a while and although I've done a fair few mods with Forscan, I don't think its possible to get this one done there. There's a guy on YT who did it by adding a proxy device between the windows and the control mechanism: The Most Amazing Mustang Mod EVER!!

Sponsored