Modifying As-Built Data Guide

[VicRattlehead]

OK, so pardon another dumb question.

In the Flash to Pass for 5 flashes, where do I insert the A.

And, as example in Police Dark Mode where does the 1 go.

I appreciate the patience. I'm learning.
Thanks.

Line 724-01-01 the second position in the second group of 4 digits

Sponsored

 

[Matthewstorm]

Line 724-01-01 the second position in the second group of 4 digits

So, it would be 0726-32-11?

 

[VicRattlehead]

So, it would be 0726-32-11?

no. Do you have FORScan setup open and connected to your car?

 

[Matthewstorm]

no. Do you have FORScan setup open and connected to your car?

Not yet. I'm trying to learn all this stuff before I pick up my car.

 

[Vlad Soare]

If you go to the address 724-01-01 you'll see three groups of digits. Two groups of four digits each, plus a shorter group of just two digits.
The second digit from the second group will be 6. Change it to A for five flashes.

Going to the address 726-32-01 you'll find three groups of four digits each. The second digit from the second group will be 0. Change it to 1 to activate the "police dark mode".

 

[Matthewstorm]

If you go to the address 724-01-01 you'll see three groups of digits. Two groups of four digits each, plus a shorter group of just two digits.
The second digit from the second group will be 6. Change it to A for five flashes.

Going to the address 726-32-01 you'll find three groups of four digits each. The second digit from the second group will be 0. Change it to 1 to activate the "police dark mode".

Thanks!

 

[GreenS550]

What am I missing? I changed the values in Forscan from 0726-12-01 014B xxxx xxxx to 0726-12-10 0163 when I changed my diff from 3.31 (stock) to 3.55. Any idea why the car doesn't apply power properly when I accelerate? Very odd.

In parentheses it says "xxxx=ratio in hex" whatever that means. Any help?

 

[GreenS550]

Oh, this is on my 2016 Mustang GT Manual Trans...

 

[Shearboy]

Have Forscan downloaded on my laptop running Windows 10 and downloaded the license downloaded but can't open the .key file. What app do I use to open the file with?

 

[Matthewstorm]

Have Forscan downloaded on my laptop running Windows 10 and downloaded the license downloaded but can't open the .key file. What app do I use to open the file with?

You load the file from within ForScan.

 

[ScubaSteve2020]

Have Forscan downloaded on my laptop running Windows 10 and downloaded the license downloaded but can't open the .key file. What app do I use to open the file with?

You open the key file, in FORScan.

 

[Shearboy]

Now I got it.

 

[Shearboy]

Ok so finally got Forscan license to work but when everything is hooked up to the car it always says no ELM connection. Have the same as the one listed in previous posts. (Second one actually, returned the first thinking it was bad) what the h3$$ am I doing wrong?

 

[Matthewstorm]

Did you restart your computer?

 

[jimmerheck]

When you plug in the dongle, does it light up? It needs to be plugged in firmly. When it's plugged in, do you have the car in run mode without the engine running? Have you switched the toggle switch back and forth to see if it makes a difference?

Sponsored