Modifying As-Built Data Guide

[MakStang]

Need the full block for animation startup, sync 3. Screwed mine up and lost my notes... Damn spring cleaning.

Thanks

Go to this post.

http://www.mustang6g.com/forums/showpost.php?p=1461365&postcount=348

I used the GT350R Snake (red) - it's fantastic!

Sponsored

 

[Crackerjack17]

So, I have everything hooked up and made a couple changes. But, I've searched and searched, did I miss where to enable "nav in motion"?

 

[Paul K]

So, I have everything hooked up and made a couple changes. But, I've searched and searched, did I miss where to enable "nav in motion"?

http://www.mustang6g.com/forums/showpost.php?p=1822315&postcount=6

 

[GiddyUp15]

http://www.mustang6g.com/forums/showpost.php?p=1822315&postcount=6

Does anyone know if this only works for Sync 3 or does it work for Sync 2 as well?

 

[Paul K]

Does anyone know if this only works for Sync 3 or does it work for Sync 2 as well?

This only works for sync 2. I just did this and also the nav mod on my 2015 gtpp. I don't think either mod works for sync 3.

 

[Crackerjack17]

http://www.mustang6g.com/forums/showpost.php?p=1822315&postcount=6

Ok, so nav while moving works, but... now everytime I turn the car on it says, " English selected" and if you go into general settings, it has English UK, plus a bunch of foreign launguages. If I revert it back, it just says English and two other choices?

Anybody else experience "English selected" everytime you start the car?

 

[nm_mustang]

911 Assist Help

I lost 911 assist after MFT sync2 and NAV upgrade in my 2015 mustang base. Has anyone that has done these upgrades still have 911 assist. Done know if it's a APIM or RCM setting or installed with 3.8 software in car update. I have not found anything doing a google search.

 

[GiddyUp15]

This only works for sync 2. I just did this and also the nav mod on my 2015 gtpp. I don't think either mod works for sync 3.

Good to know! I wasn't sure since the two others commenting about it had 2017s.

 

[BULL1TT]

I lost 911 assist after MFT sync2 and NAV upgrade in my 2015 mustang base. Has anyone that has done these upgrades still have 911 assist. Done know if it's a APIM or RCM setting or installed with 3.8 software in car update. I have not found anything doing a google search.

I had the exact same thing happen. I've tried changing some of the values in the APIM from information that I have found online but have not had any luck getting 911 assist turned back on. Let me know if you find out anything.

 

[nm_mustang]

911 Assist Help

I did find though a google search, that I person as able to get 911 assist loaded and functioning by downgrading the Sync 2 software back to 3.7. I have not tried this because I don't have a copy of 3.7.

 

[Synyster06Gates]

A few modifications I hope are found...

Enable GT350 Digital Gauges on GTPP (Digital Speedo, Trans Temp, Diff Temp...)
Enable Sport Mode activates active exhaust valve (Allows GTPP to use GT350 active exhaust)
Enable driver seat exit movement for cars without seat memory feature
Enable Track Key (Someone just needs to try it already!)
Enable fuel dump during off throttle in sport mode (Focus RS)

I will definitely be using...

Fogs on during turn signals
Fogs on during High beams
Double honk off during no key exit

[MENTION=14728]GrabberBlue[/MENTION]

Has anyone followed up on the enable sport mode activates the exhaust valve? I'm trying to wire up an OEM like active exhaust kit and if that's the case, it would make everything perfect if the GT has the same body harness as the GT350

 

[StangATX]

App should be done pretty soon. I got a little bit more time to work on it today. Probably tonight or tomorrow I'll post it up here!

 

[StangATX]

Here's the APK!

https://drive.google.com/open?id=0Byxyxl1zasPMN2sxTjZ6YnloeDg

 

[Crackerjack17]

Here's the APK!

https://drive.google.com/open?id=0Byxyxl1zasPMN2sxTjZ6YnloeDg

Nice! Well done!! What about the nav in motion code? It works, but says "English selected" evertime you start the cat.

Also, what about just putting enable and disable state in same card, instead of completely seperate?

 

[StangATX]

Nice! Well done!! What about the nav in motion code? It works, but says "English selected" evertime you start the cat.

Also, what about just putting enable and disable state in same card, instead of completely seperate?

Thanks! I will add the code whenever I get some time. What do you mean by the same card...? It should show up. Also on top right if you click on the "__" symbol it'll prompt you for a search. When the search is made it'll highlight the word from your search on the card.

Sponsored