Modifying As-Built Data Guide

[Ebm]

Any chance for the Ecoboost logo as the boot animation?

Sponsored

 

[TexasRebel]

Any chance for the Ecoboost logo as the boot animation?

Does it already exist on any Ford model?

 

[jsn1]

Any chance for the Ecoboost logo as the boot animation?

I'm sorry but I don't think is included in the latest software.

ST, RS, GT, Mustang, Lincoln, GT350, GT350R, Raptor and Ford, but haven't seen EcoBoost.

 

[Spart]

Any chance for the Ecoboost logo as the boot animation?

Not with as-built, until Ford decides (in a newer version of Sync than 2.2) to have an Ecoboost logo for one of their cars.

You can only use as-built to change settings to mimic other trim levels, other markets, or for things Ford's engineers maybe intended to offer but did not in the final product.

 

[thet33]

Not with as-built, until Ford decides (in a newer version of Sync than 2.2) to have an Ecoboost logo for one of their cars.

You can only use as-built to change settings to mimic other trim levels, other markets, or for things Ford's engineers maybe intended to offer but did not in the final product.

So now that we have 2.2 available, what are the chances of getting the digital speedometer from the Shelby working? Is this still a unicorn?

 

[TexasRebel]

So now that we have 2.2 available, what are the chances of getting the digital speedometer from the Shelby working? Is this still a unicorn?

That might be a hardware change.

 

[thet33]

That might be a hardware change.

Not what I wanted to hear... :frusty:

 

[Spart]

That might be a hardware change.

I don't think "might be" is strong enough.

As far as any of us that have tried have been able to figure out, it's a hardware change. On a lower level, it could just be the firmware in the GT350 IPC - but a cluster swap would probably be the only way right now until we figure out how to flash IPC firmware.

 

[kcc0521]

Was anyone able to get the GT350 snake to display on a 2015 model? I tried it and it didn't work. I was able to remove the double horn beep though.

 

[TexasRebel]

I don't think "might be" is strong enough.

I tend to type like I talk. Either extremely directly, short, and succinct, or I start to add words to drag sentences on that drip with sarcasm, irony, and whenever possible... sarcastic irony.

It's a world of trouble at the bars.

 

[papinist]

Was anyone able to get the GT350 snake to display on a 2015 model? I tried it and it didn't work. I was able to remove the double horn beep though.

I think that does not exist on 2015. Our cars are too old :shrug:

 

[kcc0521]

My car is going under the knife this weekend for a Auto swap. I sent a message to forscan about programming the PCM and they said they might be able to help. I am planning to flash the new auto PCM with auto as built data and use forscan to update all the other modules with the correct data. When comparing the as built files of my car to a similary equiped auto there are only minor differences in the data. When I get it all figured out I will create a new DIY thread with all the details to spare others the pain.

 

[Spart]

Was anyone able to get the GT350 snake to display on a 2015 model? I tried it and it didn't work. I was able to remove the double horn beep though.

Those are Sync 3 only. 2015's originally came with MFT.

Swap in a Sync 3 screen/APIM and you'll be able to do it.

 

[Nuked]

I don't think "might be" is strong enough.

As far as any of us that have tried have been able to figure out, it's a hardware change. On a lower level, it could just be the firmware in the GT350 IPC - but a cluster swap would probably be the only way right now until we figure out how to flash IPC firmware.

Need someone with access to IDS to try and flash the IPC with the GT350 firmware. Not sure if it would work, but I have a feeling it would. I base this theory on the fact that the early release Focus ST did NOT have the ST animation on the IPC nor the quad screen option. I asked the Ford dealer to flash the most current firmware and voila those options appeared.

 

[Spart]

Need someone with access to IDS to try and flash the IPC with the GT350 firmware. Not sure if it would work, but I have a feeling it would. I base this theory on the fact that the early release Focus ST did NOT have the ST animation on the IPC nor the quad screen option. I asked the Ford dealer to flash the most current firmware and voila those options appeared.

What I would worry about here is the hardware differences. The IPC controls the speedo and tach as well, right? Those are physically different on the GT350's. Who knows if they would continue working just fine, or if they would suddenly read way off.

Also, do any or all GT350's come with MyColor?

Sponsored