M-9602-M

[Decible]

Guys,

I have this kit but sold my 5.0 and picked up a Mach 1. Any chance this kit would work on a Mach 1 HP car?

I know it worked on the GT350/R you just didn’t use the programming.

@Steeda Tech JohnC - happen to know?

Sponsored

 

[Highvolts]

https://performanceparts.ford.com/part/M-9602-M

Fits 2018-2023 Base & GT Mustang Coupe and Convertible models equipped with MagneRide

1. Provides improved handling with unique Ford Performance springs and sway bars
2. VDM Calibration ensures compatibility between hardware and software
3. The MagneRide Handling Pack includes:
   1. M-5300-W Spring Kit
   2. M-5490-G Sway Bar Kit
   3. MagneRide Performance Pack 2 VDM Software Upgrade

NOTE: Customers with a Performance Pack 2 equipped Mustang can upgrade by installing only the M-5300-W Spring Kit and M-5490-G Sway Bar Kit

NOTE: Mach 1 Base and Mach 1 HP have unique MagneRide suspension calibrations similar to PP2

 

[kz]

It's springs and bars -there is nothing it in that would not work.

 

[Decible]

It's springs and bars -there is nothing it in that would not work.

I must have been looking at an old write up, they didn’t mention the Mach. I figured it would be just springs and bars. Thank you!!

 

[WItoTX]

Why not call FP and ask? If works, great, if not, I bet they can tell you want you need to add.

 

[Decible]

Why not call FP and ask? If works, great, if not, I bet they can tell you want you need to add.

I believe it’s just like the 350 just springs and sways but I’ll give them a call.

 

[WItoTX]

I believe it’s just like the 350 just springs and sways but I’ll give them a call.

The front knuckle on a GT350/R is different than the GT knuckle. I suspect there will be some different shock tuning because of that. And who knows, Ford might even have a slightly different tune for the rear.

And any minute now someone else will come along and confirm I am wrong. So take anything I say with a grain of salt hahaha

 

[kz]

The front knuckle on a GT350/R is different than the GT knuckle. I suspect there will be some different shock tuning because of that. And who knows, Ford might even have a slightly different tune for the rear.

And any minute now someone else will come along and confirm I am wrong. So take anything I say with a grain of salt hahaha

But he won't do any shock tuning - at least I wouldn't and I think instructions say to no upload VDM calibration that comes with it - just install springs and bars - question is what do they cost purchased separately - might be quite a bit cheaper.

 

[Decible]

But he won't do any shock tuning - at least I wouldn't and I think instructions say to no upload VDM calibration that comes with it - just install springs and bars - question is what do they cost purchased separately - might be quite a bit cheaper.

I already own the kit. I bought it a couple of years ago and never installed it on my pp1 car

Sponsored