Rock50
Well-Known Member
- Thread starter
- #1
Replaced the front side marker bulbs with LEDs. Everything good except the turn signal flashing rate changed in the cluster. This is the bulb out warning. Today, got around to disabling it via Forscan. Other threads say to change 726-07-01, but the value to be changed was already set to 0 on my 21 M1. Went through the as built options and found Front Bulb Turn Outage. Setting this to disabled was the ticket. This basically changes 726-40-02, second position (x?xx xxxx xxxx) from 1 to 0. Now the blink rate in the cluster is normal, like it was before. Hope this helps someone else.
Sponsored