jhatley7
Well-Known Member
- Thread starter
- #1
As some of you know I lost my motor at Runway Rivalry about a month ago.
Link to thread.. http://www.mustang6g.com/forums/showthread.php?t=81384
So I decided to build it bigger and better. List of new mods below.:cheers:
[MENTION=9610]jayman33[/MENTION]
Armageddon Twin turbo kit
Turbosmart Hypergate: Armageddon Edition
Turbosmart Raceport: Armageddon Edition
TWIN Garrett GTX3582R 11-Blade Billet Compressor Wheel, Dual-Ball Bearing Turbo
Ceramic Coat Hotside
Powder Coat Coldside
TKM/ Hypermotive 1500+ HP Race Prepped Short Block:
Decked/ Honed/ Deburred/ Hot Washed/ full race prepped,
balanced, and blueprinted
FRPP Aluminum Coyote Block Darton Sleeved and race
reinforcement water jacket supports/ O Ringed for further
head gasket support
FRPP Crankshaft BOSS 302 and 2016 Cobra Jet; Forged 4130 Steel.
Custom CP Coyote pistons setup for 1600hp turbo with .250” wall pins and
Nitrided Stainless Rings
Top ring moved down for big power
Thicker tops and skirts for strength
Using 1mm nitrided steel top, 1.2mm napier 2nd ring, and
Manley Pro I beam billet connecting rods W/ ARP Bolts
King/ Clevitte main and rod bearings
ARP main studs and side bolts
ARP/ Livernois head studs
Fore Innovations Triple pump with ID1700's
AMS 2000 boost controller with co2
ATI Balancer
GForce 9" Rear end conversion - 3.0 rear gear
[MENTION=28648]Scp-steve[/MENTION]
link to thread http://www.mustang6g.com/forums/showthread.php?t=82985
Factory heads, fully ported and polished, custom grind cams, upgraded springs and lightened retainers
[MENTION=9985]BMR Tech[/MENTION]
BMR everything! Actually just showed up.
[MENTION=20475]Dave@CJPP[/MENTION]
Anderson Composite's Cowl hood, trunk and gt350-r spoiler
Dusold Designs front tow hook
Boss Manifold
Qtp cutouts
Stage 3 Th400
Baer drag brakes and upgraded front rotors
Finish out welding 10-point cage, decided to go 8-point instead for now.
All ordered.
Still need...
Parachute
Fire Extinguisher
Electric water pump??
I will update this post with pics and updates as I have them. Vendors please feel free to do so also.
P.S. if any of you need anything I took off the car please pm me.
Few before pics.
at the Stealership
Whipple, cj intake, watson ice box.
Roll bar
Before teardown
As she sits now in the shop.
Link to thread.. http://www.mustang6g.com/forums/showthread.php?t=81384
So I decided to build it bigger and better. List of new mods below.:cheers:
[MENTION=9610]jayman33[/MENTION]
Armageddon Twin turbo kit
Turbosmart Hypergate: Armageddon Edition
Turbosmart Raceport: Armageddon Edition
TWIN Garrett GTX3582R 11-Blade Billet Compressor Wheel, Dual-Ball Bearing Turbo
Ceramic Coat Hotside
Powder Coat Coldside
TKM/ Hypermotive 1500+ HP Race Prepped Short Block:
Decked/ Honed/ Deburred/ Hot Washed/ full race prepped,
balanced, and blueprinted
FRPP Aluminum Coyote Block Darton Sleeved and race
reinforcement water jacket supports/ O Ringed for further
head gasket support
FRPP Crankshaft BOSS 302 and 2016 Cobra Jet; Forged 4130 Steel.
Custom CP Coyote pistons setup for 1600hp turbo with .250” wall pins and
Nitrided Stainless Rings
Top ring moved down for big power
Thicker tops and skirts for strength
Using 1mm nitrided steel top, 1.2mm napier 2nd ring, and
Manley Pro I beam billet connecting rods W/ ARP Bolts
King/ Clevitte main and rod bearings
ARP main studs and side bolts
ARP/ Livernois head studs
Fore Innovations Triple pump with ID1700's
AMS 2000 boost controller with co2
ATI Balancer
GForce 9" Rear end conversion - 3.0 rear gear
[MENTION=28648]Scp-steve[/MENTION]
link to thread http://www.mustang6g.com/forums/showthread.php?t=82985
Factory heads, fully ported and polished, custom grind cams, upgraded springs and lightened retainers
[MENTION=9985]BMR Tech[/MENTION]
BMR everything! Actually just showed up.
[MENTION=20475]Dave@CJPP[/MENTION]
Anderson Composite's Cowl hood, trunk and gt350-r spoiler
Dusold Designs front tow hook
Boss Manifold
Qtp cutouts
Stage 3 Th400
Baer drag brakes and upgraded front rotors
Finish out welding 10-point cage, decided to go 8-point instead for now.
All ordered.
Still need...
Parachute
Fire Extinguisher
Electric water pump??
I will update this post with pics and updates as I have them. Vendors please feel free to do so also.
P.S. if any of you need anything I took off the car please pm me.
Few before pics.
at the Stealership
Whipple, cj intake, watson ice box.
Roll bar
Before teardown
As she sits now in the shop.
Sponsored
Last edited: