Idle hanging bad after Roush AB install ???

[RSKTAKR]

FPGM0KT

I had issues from the start with the SCT. I had to have SCT send me a file to "unlock" my strategy or something like that, before it would let me load the Lund tunes.

Interesting... mine is FPGMOKH. awfully close.

Sponsored

 

[GiddyUp15]

FYI, my car is in the shop for this issue now. It is back to all stock parts with the exception of the Roush Axle-back, and it still has this sticking/hanging idle issue.

Here is the thread for all my issues.

 

[Jake 87]

So my car does this rev hang but only when I'm pulling the car up to high revs like on ramps to the highway. I bring 3rd up to around 6K and I shift to neutral and the revs sit at ~4K for 2 seconds I'd say. Definitely strange to me as I've never had this feature in a manual car. So is the consensus that it is normal... possibly? Lol.

Hope all of your issues get taken care of GiddyUp.

 

[RSKTAKR]

So my car does this rev hang but only when I'm pulling the car up to high revs like on ramps to the highway. I bring 3rd up to around 6K and I shift to neutral and the revs sit at ~4K for 2 seconds I'd say. Definitely strange to me as I've never had this feature in a manual car. So is the consensus that it is normal... possibly? Lol.

Hope all of your issues get taken care of GiddyUp.

What is your strategy code?

 

[GiddyUp15]

I finally found an older video that shows a good example of the idle hanging I had with the CAI/Lund Tune. This isn't even the worst of it, as I didn't have it revved THAT high in this video (originally shot the video for exhaust clips, but realized later I did vertical video...:doh

[ame]

Sponsored