Jackhammer
Member
- Thread starter
- #1
I am working on a Gen 2 5.0 Coyote that had the heads off.
The heads were ported and reassembled.
My question is do you just follow the typical Ford timing procedure on this link?
http://www.mustang6g.com/forums/showthread.php?t=39249
Do we start with the drivers side, line up the blue links on the chain with the crank sprocket and cam sprocket and go from there?
Keep in mind we will have to turn the cams to get the mark in the right position.
Any help will be greatly appreciated.
Thanks on advance,
Jack
The heads were ported and reassembled.
My question is do you just follow the typical Ford timing procedure on this link?
http://www.mustang6g.com/forums/showthread.php?t=39249
Do we start with the drivers side, line up the blue links on the chain with the crank sprocket and cam sprocket and go from there?
Keep in mind we will have to turn the cams to get the mark in the right position.
Any help will be greatly appreciated.
Thanks on advance,
Jack
Sponsored