For those looking for HP wheels....

[Mikepol2]

To be frank bro, to me they're just hideous looking Wheels.

to each their own I guess, honestly I think they look cleaner than those bird nest handling package wheels. Hard to screw up a basic five spoke design. I just don’t like the color with my silver car.

Sponsored

 

[Jimmy Dean]

to each their own I guess, honestly I think they look cleaner than those bird nest handling package wheels. Hard to screw up a basic five spoke design. I just don’t like the color with my silver car.

for that 800/pair, if I cannot find some cheaper, it might be worth picking up a set and trying to get them polished like M500s

 

[shogun32]

I’ll say this we all would like to have cash it would take to buy a super light weight forged wheel. Which for my car would have to be custom made.As far as I know aftermarket wheel manufactures don’t make a wheel with the same specs or really close to fit a PP2. So for me this is a good option. I already have a set of cup 2’s to put one them.

depending on your tolerance for spacers... and flow-formed instead of forged...

19x10.5 ET25 c3 4.3 6.2 VMR V810, Konig Hypergram

19x10.5 ET30 4.1 6.4 OE GT350, ESR RF02, Curva C300

19x10.5 ET35 c 3.9 6.6 Ray's gramlights, VMR V710FF/V810, Enkei 460-8105-6638/490-8105-6525/490-910-6540/490-810-6538(maybe)
Mustang: 4mm to front strut, 285/35 max

19x10.5 ET40 3.7 6.8 MRR GF6/7, Konig UF09514406

 

[Smunczen]

depending on your tolerance for spacers... and flow-formed instead of forged...

19x10.5 ET25 c3 4.3 6.2 VMR V810, Konig Hypergram

19x10.5 ET30 4.1 6.4 OE GT350, ESR RF02, Curva C300

19x10.5 ET35 c 3.9 6.6 Ray's gramlights, VMR V710FF/V810, Enkei 460-8105-6638/490-8105-6525/490-910-6540/490-810-6538(maybe)
Mustang: 4mm to front strut, 285/35 max

19x10.5 ET40 3.7 6.8 MRR GF6/7, Konig UF09514406

Sorry no spacers for me. My choice.

 

[Charlemagne]

Can be used for Boat Anchor if needed...according to the documentation they weight 1.5lbs less for front wheel and 2lbs for the rear over the standard Mach1 wheel, which means still in the 30+lb range.

I noticed something interesting, PS4s 275/40 tyre weighs 31 lbs but 295/35 (my choice) weighs 28 lbs and 315/30 weighs 29 lbs. So the combined weight saving on the rear wheel is 4-5 lbs less from base Mach 1 wheel, not just 2 lbs

 

[shogun32]

Sorry no spacers for me. My choice.

maybe you want to take Steeda up on their new offering from MRR?
https://www.mrrwheels.com/products/fs6
Maybe @SteedaTech will post a new thread about them and a link to their website.

 

[Dave2013M3]

I noticed something interesting, PS4s 275/40 tyre weighs 31 lbs but 295/35 (my choice) weighs 28 lbs and 315/30 weighs 29 lbs. So the combined weight saving on the rear wheel is 4-5 lbs less from base Mach 1 wheel, not just 2 lbs

I was quoting the weight savings of just the wheels themselves.

 

[D Bergstrom]

As far as I know aftermarket wheel manufactures don’t make a wheel with the same specs or really close to fit a PP2.

Closest I have found without the need for spacers would be Apex SM-10’s. 19x11 all around, using the 26mm offsets in front and 52mm offsets in the rear.

Doug

 

[OutWest]

To be frank bro, to me they're just hideous looking Wheels.

Your adversi

to each their own I guess, honestly I think they look cleaner than those bird nest handling package wheels. Hard to screw up a basic five spoke design. I just don’t like the color with my silver car.

I agree. No one of my friends or family members liked the alternative non-HP wheels (the magnetic-painted aluminum wheels). They all thought they were just too common of a design, while the five spoke looked classier.

 

[shogun32]

MRR M600/SVE GT7 come in 19x11 in et24 and et50. But they are discontinued though you can still find some on ebay at rather crazy markups vs what they were selling for a year ago.

 

[Scat2018]

I wonder if they’re going to be selling the optional Mach1 wheel

 

[D Bergstrom]

I wonder if they’re going to be selling the optional Mach1 wheel

Ford Performance sells them as a kit:

https://performanceparts.ford.com/part/M-1007K-DC19MB

Just a different color.

Doug

 

[Atlas1]

I wonder if they’re going to be selling the optional Mach1 wheel

Part numbers for
Front……..LR3Z-1007-D
Rear……….LR3Z-1007-E

 

[Scat2018]

Ford Performance sells them as a kit:

https://performanceparts.ford.com/part/M-1007K-DC19MB

Just a different color.

Doug

I Was looking at them.my scat pack chargers had satin black and they look good,but show scratches Easly. Not very durable finish. The ford racing wheel say the clear Coated,so the might be more Durable

 

[D Bergstrom]

I have had a set of the 19x10.5/19x11 versions for over a year and they have held up fine, still look brand new.

Doug

Sponsored