First mods to your Mach 1

[WCRookie99]

Who sells these? I know there’s a lot out there but these look different

Sponsored

 

[AUsomTiger]

Tinted windows
I saw a Mach 1 with an orange stripe on the front splitter on Youtube. That looked interesting.
Thinking about wrapping the side mirrors to match the orange stripe too.
Nothing too radical.

 

[jsullboy]

I have already purchased (but still waiting for the car)

- bmr jack rails
- Ford Performance oil separator
- Ford Performance air filter
- Ford Performance hood struts
- Foldable front plate holder to hide the ugly front plate at shows

Kept the weather techs from my 2017 GT. I will see how they fit. Also kept my GT performance pack rims with cold weather tires. Kept the trunk net too.

Since my first dealer messed up my order I won't get the handling package so I am thinking about the GT500 spoiler.

Will do ceramic coating. I have never done ceramic before so would appreciate some advice on what to look for.

 

[jsullboy]

does anybody know if the gt 500 wing will bolt right in the existing holes from the Mach 1 wing. I know Stangmode installed early style gt350 wing on his

I think there is an install video on CJ Pony parts or American muscle. I don't think you need to drill but the existing spoiler is glued on if I remember correctly.

 

[jsullboy]

I wonder what affect it might have on the horsepower, if any, which he did not mention.

There is a video on YouTube where the resonator delete showed a nice bump in torque

 

[Charlemagne]

For those who wanted another stock/H-pipe comparison, you can listen here in all modes at 7:58:

 

[bossman90]

I have already purchased (but still waiting for the car)

- bmr jack rails
- Ford Performance oil separator
- Ford Performance air filter
- Ford Performance hood struts
- Foldable front plate holder to hide the ugly front plate at shows

Kept the weather techs from my 2017 GT. I will see how they fit. Also kept my GT performance pack rims with cold weather tires. Kept the trunk net too.

Since my first dealer messed up my order I won't get the handling package so I am thinking about the GT500 spoiler.

Will do ceramic coating. I have never done ceramic before so would appreciate some advice on what to look for.

Which "Ford Performance air filter" exactly? Could you post part number of it?

 

[jsullboy]

Which "Ford Performance air filter" exactly? Could you post part number of it?

Its the air filter for the GT350: M-9601-G

2015-2020 MUSTANG SHELBY GT350 AIR FILTER| Part Details for M-9601-G | Ford Performance Parts

The cold air intake is should be the same on the Mach 1.

 

[ChitownStang]

https://www.steeda.com/airaid-mustang-blue-air-filter-upgrade-268-860-512.html

Cheaper than Ford performance and also made by same Airaid

 

[Mikepol2]

Trying to get the time and courage to paint my base 5-spoke winter wheels gloss black, I think it would look much better against the iconic silver than the stock gray wheel color. Hardest part would be masking off the machined rim since there's not a sharp corner to cut the tape against but I did a trial run using blue painter's tape and careful use of a half-round file and it worked great!

 

[Jimmy Dean]

Trying to get the time and courage to paint my base 5-spoke winter wheels gloss black, I think it would look much better against the iconic silver than the stock gray wheel color. Hardest part would be masking off the machined rim since there's not a sharp corner to cut the tape against but I did a trial run using blue painter's tape and careful use of a half-round file and it worked great!

get the courage to try and polish the faces shiny ;)

 

[Mikepol2]

get the courage to try and polish the faces shiny ;)

LOL yeah I know you're into that polished face look but there is no way it would look good with this wheel construction. There is nowhere to get a nice edge on the polished areas, every corner is rounded off.

 

[pappagray]

First round of Mods where to fix the stock wagging tail and wheel hop issues. Steeda Springs, Steeda Vertical links, Steeda stop the hop ulitmate rear kit, Extended length ball joints, Steeda Front sway bar links. Fixed all my concerns with the stock suspension.

 

[hbash]

First round of Mods where to fix the stock wagging tail and wheel hop issues. Steeda Springs, Steeda Vertical links, Steeda stop the hop ulitmate rear kit, Extended length ball joints, Steeda Front sway bar links. Fixed all my concerns with the stock suspension.

Could you provide links to the parts?

 

[pappagray]

Just check out steeda's site, its all on there. Pending what your doing with the car, some of it may not be necessary. For how I use these cars, it was in my opinion.

Sponsored