*Edited* Ordered Procharger Stage 2 P1X.

[SolarFlare]

Aw shit

LOL

Sponsored

 

[Staynumz]

Thanks that’s kinda what I figured. That’s another 3500ish on top of whatever blower. Really putting a crimp in my go fast plans

You have to add a fuel system when boosted on E85.

 

[shogun32]

Thanks that’s kinda what I figured. That’s another 3500ish on top of whatever blower. Really putting a crimp in my go fast plans

take the washer out from under the pedal. Then it'll go to 110%.

 

[LSchicago]

So I bought the Procharger stage 2 tuner kit, P1X with big red BOV. Came with a 4.38" pulley for 12# of boost. Also bought a BBR Jackal Jr. fuel system with twin Hellcat pumps, PTFE lines, and rails. Will be ordering DW 95# injectors, 170* thermostat and NGK 6510 plugs. Anything else besides OPG & CS gears I'm missing? Will be running E85 Most of the time and tuned by Lund. Looking for 850 RWHP on E.

 

[wingnutt]

 

[18 Smoke]

NGK6510 not really correct heat range for boosted Gen3. Look at Brisk RR12S

 

[Jackson1320]

So I bought the Procharger stage 2 tuner kit, P1X with big red BOV. Came with a 4.38" pulley for 12# of boost. Also bought a BBR Jackal Jr. fuel system with twin Hellcat pumps, PTFE lines, and rails. Will be ordering DW 95# injectors, 170* thermostat and NGK 6510 plugs. Anything else besides OPG & CS gears I'm missing? Will be running E85 Most of the time and tuned by Lund. Looking for 850 RWHP on E.

I think you might need a little more boost to get your 850whp

 

[LSchicago]

NGK6510 not really correct heat range for boosted Gen3. Look at Brisk RR12S

Lund recommended the NGK's. Good to know, I'll look into them. Thanks.

 

[LSchicago]

I think you might need a little more boost to get your 850whp

14#?

 

[80FoxCoupe]

14#?

Boost is an arbitrary number...

 

[LSchicago]

Boost is an arbitrary number...

I know 12# will be close once I add a few other supporting mods. I saw Procharger took a 100% stock Mustang, added a P1X on 16# with just a fuel system and made 900RW.

 

[80FoxCoupe]

I know 12# will be close once I add a few other supporting mods. I saw Procharger took a 100% stock Mustang, added a P1X on 16# with just a fuel system and made 900RW.

Good rule of thumb, 15psi should double your NA output. Talking whp here.

 

[Dominant1]

You could add this 4” pipe, i got one picked up 25 hp with it.

https://ibb.co/Y2vQGsJ

https://ibb.co/n8RX4Z6

https://www.makperformance.com/2015...t-for-HOStage-2-Supercharger-Kits-_p_593.html

 

[LSchicago]

You could add this 4” pipe, i got one picked up 25 hp with it.

https://ibb.co/Y2vQGsJ

https://ibb.co/n8RX4Z6

https://www.makperformance.com/2015...t-for-HOStage-2-Supercharger-Kits-_p_593.html

Just heard MAK is coming out with a gen 2, 4.5" pipe in about a month. It is said to work with the Big Red valve too. I will probably order that one.

 

[80FoxCoupe]

I can't imagine a 4.0 or 4.5 inlet fitting well on a stage 2 P1X/D1X.

Sponsored