Drilled rotors wanted

[ralph7]

I want to go with the drilled and slotted rotor look on my upcoming brake job.
Just for the look, I know this won't increase my braking performance.
Who would you recommend as a source for the four rotors and pads?
2019 Bullitt

Sponsored

 

[SBR70.3]

IMHO, if you want a REALLY good brake porn look, a 2 piece slotted would be the way to go. The Steeda 2 piece is gorgeous. Girodisc makes a damn good rotor too.

Plenty of options on American Muscle's website, but a good 2 piece is sexy.

 

[ZachSteeda]

We have a couple different options for you. Here are two links but you should be able to look at our other options if these two links don't match what you're looking for.

https://www.steeda.com/steeda-555-6044-s550-brake-rotor-set?utm_source=6g&utm_campaign=zach-rotors

https://www.steeda.com/steeda-s550-...5-6034?utm_source=6g&utm_campaign=zach-rotors

 

[WItoTX]

Get some good drill bits and DIY...way cheaper. You can even wrap the hub with some CF vinyl and really it pop.

Sorry, couldn't help myself. If just for looks, I wouldn't mess with anything as pricy as Steeda or Girodisc. Plenty of less expensive street only options out there.

 

[luc]

I want to go with the drilled and slotted rotor look on my upcoming brake job.
Just for the look, I know this won't increase my braking performance.
Who would you recommend as a source for the four rotors and pads?
2019 Bullitt

Well, since you know that it’s only for look, get the cheapest ones you can get on RockAuto
…and btw,my 17pp1 on squared 305 is a track car only and i use the cheapest blanks that can get from rockauto
Never had a problem in 8 years

 

[WItoTX]

Well, since you know that it’s only for look, get the cheapest ones you can get on RockAuto
…and btw,my 17pp1 on squared 305 is a track car only and i use the cheapest blanks that can get from rockauto
Never had a problem in 8 years

You aren't the only one. Lot of guys have really good luck going that route.

Sponsored