Diode Dynamics - Front Turn Signals

[onelfastlride]

Just to confirm, the front Turn Signals on a 2020-21 GT500 are the same as found on a 2015-2017 GT?

I want to make sure I got the right Diode Dynamics front turn signal replacements. PN DD5011. They are shown to fit a 2018-2020 GT350, but the description says 2015-2017 GT, application shows 2015-2017 GT & 2018-2020 GT350. I know the bumper bracket must be modified to fit the GT500.

Sponsored

 

[natepcbfl]

Just to confirm, the front Turn Signals on a 2020-21 GT500 are the same as found on a 2015-2017 GT?

I want to make sure I got the right Diode Dynamics front turn signal replacements. PN DD5011. They are shown to fit a 2018-2020 GT350, but the description says 2015-2017 GT, application shows 2015-2017 GT & 2018-2020 GT350. I know the bumper bracket must be modified to fit the GT500.

I can't speak to the fit but make sure you get the DRL harness or they will not blink unless the lights are on. Been there done that...

 

[Bikeman315]

They may fit but that doesn’t mean they will work. I’m guessing that DD does not list them for use with the GT500 for a reason. Contact them before ordering.

 

[onelfastlride]

I think they'll fit & work. It's already be done by Protraxduner. I'm just attempting to make sure I bought the right PN.

Post # 802
https://www.mustang6g.com/forums/threads/1st-mods-on-2020-gt500.125361/page-54

 

[Bikeman315]

I think they'll fit & work. It's already be done by Protraxduner. I'm just attempting to make sure I bought the right PN.

Post # 802
https://www.mustang6g.com/forums/threads/1st-mods-on-2020-gt500.125361/page-54

Ok, understood. Not sure why you would “butcher” a bracket on an $80k car but that’s just me.

 

[protraxduner]

I am not sure of the actual part number but what you described appears right. i bought directly from DD, just make sure you choose clear or smoked....but not finding a part number on there site.


Sequential LED Turn Signals for 2015-2017 Ford Mustang (pair) (USDM) (diodedynamics.com)

 

[Bikeman315]

I am not sure of the actual part number but what you described appears right. i bought directly from DD, just make sure you choose clear or smoked....but not finding a part number on there site.


Sequential LED Turn Signals for 2015-2017 Ford Mustang (pair) (USDM) (diodedynamics.com)

I just did..

 

[protraxduner]

I obviously didn't scroll down...

 

[onelfastlride]

Ok, understood. Not sure why you would “butcher” a bracket on an $80k car but that’s just me.

Butcher is a harsh word, I prefer modify. I'm assuming you are choosing to leave you car 100% stock. No intake, no exhaust, no................because the vast majority of aftermarket parts require a little tweak here or there to make them work.

 

[Bikeman315]

Butcher is a harsh word, I prefer modify. I'm assuming you are choosing to leave you car 100% stock. No intake, no exhaust, no................because the vast majority of aftermarket parts require a little tweak here or there to make them work.

No offense intended, it wasn't my word.

1. Replaced parking lamps with diode dynamics smoked sequential units. This should be a simple unbolt/bolt in BUT the housing on GT500 is slimmer, so getting the diode dynamics to fit required quite a bit of the factory bracket to be butchered.

 

[protraxduner]

I was being overdramatic, butcher was not the right word....but you have to heavily modify/remove a lot of the bracket.

 

[Evolvd]

I also purchased these but haven’t gotten around to installing them yet. I don’t mind dremeling some of the bumper support to make these fit, no one will ever see the modification unless the bumper is off.

 

[Alex.Envy]

Did someone say butcher? It’s a car, do what ya want and if it needs a little bit of a snip snip, then do whatever gets it done.

 

[Epiphany]

That looks like it may cause cancer in the state of California.

 

[Evolvd]

That looks like it may cause cancer in the state of California.

Everything does, in fact they probably have a Prop 65 warning on the air your breathe in California.

Sponsored