Convert back to reaonator

[Stang65]

Looking for information on removing my Steeda H Pipe and going back to stock resonator. Is that doable? I think the clamps that were used from the steeda pipe can be used.

I tried to search. Thank you

Sponsored

 

[Nagare]

If the cuts were all clean and they didn't remove anything extra afterwards and drop it, should be able to clamp up fine.

 

[dirtwarrior]

There are chambered H mufflers around that do very good that may work better

 

[MAGS1]

Should be able to clamp them back. If you’re having a shop do it, I’d ask them to tack weld the clamps too just to make sure the clamps don’t loosen up so you don’t get any leaks

 

[FUN2RIDEFAST]

Looking for information on removing my Steeda H Pipe and going back to stock resonator. Is that doable? I think the clamps that were used from the steeda pipe can be used.

I tried to search. Thank you

I do it with my x pipe.

 

[Stang65]

There are chambered H mufflers around that do very good that may work better

I am not a fan of the crackle and pops on deceleration. Just not my thing. Thank you

 

[FUN2RIDEFAST]

I am not a fan of the crackle and pops on deceleration. Just not my thing. Thank you

I have an x pipe and occasionally put it on until it drives me crazy.

 

[NightmareMoon]

I had one put back on my car. Had to source a local one used (I threw mine out) and have an exhaust place weld the pipes, but no big deal, they do that kind of work all the time. I’m much happer with the resonator sound when paired with a good axle back.

 

[dirtwarrior]

I have an x pipe and occasionally put it on until it drives me crazy.

mine didn't

 

[MrMike]

There's also the option of the FP resonator if your system is 2.5".

https://accessories.ford.com/produc...ormance-by-borla-gt-forward-resonator-muffler

I haven't used it personally, just putting it out there.

 

[dirtwarrior]

here is the one I got
https://www.amazon.com/gp/product/B002HCA8B0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
with Borla clones behind the axle and it sounds great

 

[Cafasco]

Yeah you can do that with the Steeda clamps as others have noted. I put mine back in after getting some Borla S axle back mufflers. Sounded great with the H pipe, but was a bit louder than I wanted esp for any road trips.

Sponsored