clutch pedal misaligned

[dnjohnson33]

Hello everyone?

Having an issue with my clutch pedal on GT 2015. When I press it down, it won’t go all the way to the floor unless I manually push the pedal to the right. Once I do that, it fully depresses. My car requires a full press of the clutch to start, a task that requires multiple attempts to start. I also noticed the pin isn’t flush compared to other examples I’ve seen.There doesnt appear to be any cracks anywhere. Has anyone else run into this or have any ideas on how to fix it? Any help would be greatly appreciated!




here is mine

here is a image i found online. Disregard his red highlight. the pin tothe right is flush

Sponsored

 

[Mike Pfeifer]

I would look at the pivot point, maybe there’s a bushing that is worn out. Or a weld that is broken, I think these are known for that. You shouldn’t really be able to move the pedal left and right. Also, what’s with the blue and yellow marks? I usually only see that on salvage parts.

 

[dnjohnson33]

I bought my car brand new, so I'm not sure why those marks are there.

 

[stang1087]

I think the weld failed at the top pivot point. There's a couple of threads about this issue.

Higher mileage (50k+ miles) manual cars, check your clutch pedals | 2015+ S550 Mustang Forum (GT, EcoBoost, GT350, GT500, Bullitt, Mach 1) - Mustang6G.com

Clutch/brake pedal assembly removal | 2015+ S550 Mustang Forum (GT, EcoBoost, GT350, GT500, Bullitt, Mach 1) - Mustang6G.com

 

[CowboyJohn]

Did you get your issue diagnosed and repaired?

Mine had broken welds.

Some photos for reference.

Sponsored