Brembo front caliper decal

[FUN2RIDEFAST]

I bought a pair of Brembo calipers off ebay and am going to powder coat them yellow and rebuild them. I see lots of decals on line but I'm concerned about quality. I just want to do it once. Suggestions welcomed.

Sponsored

 

[Firsttexan]

I bought a pair of Brembo calipers off ebay and am going to powder coat them yellow and rebuild them. I see lots of decals on line but I'm concerned about quality. I just want to do it once. Suggestions welcomed.

I found mine on Amazon. High quality ceramic high temp sticker.

https://www.amazon.com/dp/B07KSPWHR4?psc=1&ref=ppx_yo2_dt_b_product_details

 

[FUN2RIDEFAST]

I found mine on Amazon. High quality ceramic high temp sticker.

https://www.amazon.com/dp/B07KSPWHR4?psc=1&ref=ppx_yo2_dt_b_product_details

Thanks. That's where I just ordered from.

 

[DougS550]

I found mine on Amazon. High quality ceramic high temp sticker.

https://www.amazon.com/dp/B07KSPWHR4?psc=1&ref=ppx_yo2_dt_b_product_details

Same here. The stickers Work just fine.

 

[bankyf]

I found mine on Amazon. High quality ceramic high temp sticker.

https://www.amazon.com/dp/B07KSPWHR4?psc=1&ref=ppx_yo2_dt_b_product_details

I purchased a set of the same decals. They should work fine, but please note that there is nothing special (ceramic or high temp) about these. It's just plain premium vinyl that any sign shop can make. My powder coater actually did enough Brembo brakes that he made his own decals so I ended up going with his.

 

[FUN2RIDEFAST]

I purchased a set of the same decals. They should work fine, but please note that there is nothing special (ceramic or high temp) about these. It's just plain premium vinyl that any sign shop can make. My powder coater actually did enough Brembo brakes that he made his own decals so I ended up going with his.

Thanks. I've ordered some off Amazon that are supposed to be heat resistant and the correct size. We'll see.

 

[Roadsign]

+1 on the Amazon decals. Painted calipers, clear coated over the decals. Only been on 6 months or so but no issues yet.

 

[FUN2RIDEFAST]

+1 on the Amazon decals. Painted calipers, clear coated over the decals. Only been on 6 months or so but no issues yet.

Since I'm getting them powder coated I'll just see how the regular adhesive works. I'm surprised Brembo doesn't sell them.

 

[Firsttexan]

Since I'm getting them powder coated I'll just see how the regular adhesive works. I'm surprised Brembo doesn't sell them.

They do on a new caliper.

 

[FUN2RIDEFAST]

They do on a new caliper.

Actually emailed Brembo asking about the decals and they asked for my address and were forwarding it to their warehouse. So we'll see what happens. I will update when I find out.

They do on a new caliper.

I actually emailed them about the decals and they asked for my address and were forwarding it to their warehouse. So we'll see what happens next. I'll update you when I find out more.

 

[StangTime]

They do on a new caliper.

I'm pretty sure Brembo silkscreen their logo on.

 

[Jerry Carguy]

I did a thermal test on vinyl a while back using my heat gun and a hand held temperature reader. Stopped at 180*. Nothing happened to the vinyl. Also, calipers don't get as hot as most people think. The brake pad acts as an insulator from the rotor.

 

[Chef jpd]

This is why:

 

[FUN2RIDEFAST]

I'm pretty sure Brembo silkscreen their logo on.

This will be interesting. Probably want a VIN at some point....

I included the type of brake the decals are for because they come in two different sizes. Nothing ventured, nothing gained.

 

[bankyf]

I'd be surprised if Brembo accommodates the request. They seem to be very much against their calipers being re-coated.
https://www.brembo.com/en/company/news/5-reasons-not-to-use-repainted-brake-calipers-brembo

Sponsored