BMR CB005 issue

[BCGT]

OK .... Just to sum up in my case: washers are OK and I should wait until you've completed analysis to see if a solution (ie shim plate) will be available for those of us with this issue.

Sounds good to me and I look forward to revisiting this in a few weeks.

Sponsored

 

[Dragster]

I've got mine ready to go, but I'm waiting on my rear sway bar to get here this week so I can do them both at the same time. I'll let everyone know how it goes. I've certainly had a good experience with Kelly and BMR so far!

 

[Varekai]

I didn't have a single issue with my install.

 

[dubster99]

No issues here either.

 

[Jmeo]

I didn't have a single issue with my install.

No issues here either.

Most people will have no issue because the parts are quality. This is just the variance Kelly was referring to as not all cars come off the line exactly same.

 

[dubster99]

I also used the steeda subframe alignment bushings at the same time...that may have played a part in mine lining up better.

 

[Jmeo]

What happened for me and a few others is after the front passengers side subframe bolt is tightened there was a gap between the arm and the body of the car where the two bolts attach to body. No given reason why this happens for a few of us but the alignment bushings are not the cause. I only put the bushings in the other day and the gap issue was there before I did this.

 

[moarhorsepower]

So would the best be get the CB005 kit and pair them with the Steeda subframe alignment kit? Was thinking this plus pair it with the BK054 differential lockouts

 

[Jmeo]

So would the best be get the CB005 kit and pair them with the Steeda subframe alignment kit? Was thinking this plus pair it with the BK054 differential lockouts

Absolutely get CB005. I suggest you use with the alignment kit to, why not it's $30 ish and guarantees subframe alignment.

Diff lock outs will only further your anti wheel hop needs [emoji106]

 

[dubster99]

Anybody else notice a slight creaking noise from the right rear after installing this? Only happens when taking off normally from a stop, for a second or two when the clutch is being let out. Almost sounds like the rear interior decklid moving around or something. Sounds a little like a tire rub, but I know it's not that.

 

[John S.]

Mine just came in today. I'll install tomorrow.

 

[montreal ponies]

Mine just came in today. I'll install tomorrow.

Waiting on some feedback .

 

[John S.]

Waiting on some feedback .

Sorry it won't be today as planned. My wife dragged me to the mall instead. :frusty: I'm going to "accidentally" PIIHB tonight as revenge.

 

[BMR Tech]

HAHAHAHAHAHAHAHAHAH!!!

John, come to the track tonight (BMP) - bunch of local Mustangs are going, and I will be running my '15 as well. ;)

 

[John S.]

HAHAHAHAHAHAHAHAHAH!!!

John, come to the track tonight (BMP) - bunch of local Mustangs are going, and I will be running my '15 as well. ;)

Man, I'd love to go. I haven't been to BMP in about 11 years. Unfortunately tonight wont work for me but I will definitely try next time. :cheers:

Sponsored