Aggressive Fitment Thread

[Digital_Synapse]

THat looks really good. Those tires aren't as squeezed on the wheels as much as I would have expected.

They are exactly as squeezed as I expected. From personal experience I can say when you start pushing that setup it starts walking that sidewall. Scary stuff. Plan to run 19x11 square with 305/30/19 square. I need a tighter, more predictable feel.

Sponsored

 

[Tommy V]

Its about the same brotha.

Hey Paul how's it going?question for u,I have the Ferrada fr1 20x11.5 on the rear of my car.I switched to a 2017 auto and am not going to lower this one.On my pp car I put a 295/35 20 on the back with the steeda progressives and it looked great.I want to know how much wider of a tire I can fit with no rubbing since I'm not lowered now.Also will run some - camber.I would like to put a 325 on their.

 

[Racerbox77]

Width is only half of the equation. Need offset or backspacing

 

[Tommy V]

Paul.already has the specs on my wheels,since i bought them from him lol.

 

[Need4SpeedMotors]

I believe they are pretty close front and rear. Here are a couple of pics so you can decide for yourself.

Looks perfect :eyebulge:

 

[Mospeed Performance]

Hey guys! Need a bit of advice here before I pull the trigger as I'm looking at a similar set of fairly aggressive wheels for my GT.

The owner of the car below says that the pictures below show a TE37 in 20X10.5 +22 all around on 275s (and that they fit with no issue).

Does that sound about right to you folks?

 

[Racerbox77]

Hey guys! Need a bit of advice here before I pull the trigger as I'm looking at a similar set of fairly aggressive wheels for my GT.

The owner of the car below says that the pictures below show a TE37 in 20X10.5 +22 all around on 275s (and that they fit with no issue).

Does that sound about right to you folks?

10.5 with a 22 will poke on the front. I have 10" with 35 and it's about flush. I'd say with a good amount of camber you can make it work but won't look good IMA.

 

[MRRDesignWheels]

Hey guys! Need a bit of advice here before I pull the trigger as I'm looking at a similar set of fairly aggressive wheels for my GT.

The owner of the car below says that the pictures below show a TE37 in 20X10.5 +22 all around on 275s (and that they fit with no issue).

Does that sound about right to you folks?

If your going for that aggressive stance which will look dope lol it will work.
I can try to look for some pics but we did have a client do a 19x10.5 front and a 19x11 rear with our FS01 wheels.

you can also get the look with out going to wide/ simply lowering the off sets of the wheels, if you already have some wheels on your car then you can add some spacers and it will give you a good idea of what to expect.

but** this would look funny if you have a 20x8.5 and you add like a 20mm spacer lol ** you do want the wheels to be some what wide.
mods maybe required like fender work, possible camber and open minded to tire sizes.

 

[JuRuKi]

Hey guys! Need a bit of advice here before I pull the trigger as I'm looking at a similar set of fairly aggressive wheels for my GT.

The owner of the car below says that the pictures below show a TE37 in 20X10.5 +22 all around on 275s (and that they fit with no issue).

Does that sound about right to you folks?

now thats what i call aggressive

 

[2morrow]

If your interested in TE-37's you should hit up the big homie [MENTION=17084]MANDARK[/MENTION]. He's rockin' a gorgeous set and I think there was some additional work that was needed to make this set work properly.

 

[Mospeed Performance]

If your interested in TE-37's you should hit up the big homie [MENTION=17084]MANDARK[/MENTION]. He's rockin' a gorgeous set and I think there was some additional work that was needed to make this set work properly.

Thanks buddy! I will send him a message - those DO look good!

 

[2morrow]

Thanks buddy! I will send him a message - those DO look good!

His ride is so legit, I want to get that pony on the track.

I don't think he'd let me tho...:lol:

 

[Paul@PKAUTODESIGN]

His ride is so legit, I want to get that pony on the track.

I don't think he'd let me tho...:lol:

he wont lol

 

[Trakhor]

If your interested in TE-37's you should hit up the big homie [MENTION=17084]MANDARK[/MENTION]. He's rockin' a gorgeous set and I think there was some additional work that was needed to make this set work properly.

Here's the build thread

http://www.mustang6g.com/forums/showthread.php?t=75916

 

[Mospeed Performance]

he wont lol

Paul, any insight on stuffing 20x10.5 +22 squared on an S550? I feel like you’re the man with the plan when it comes to offsets!

Sponsored