A Boy & his Mustang...

[aham23]

In AZ the first mod is always tint!

15% Ceramic Tint sides and rear glass and clear on the windshield. Done by the great team at Tint Cartel in Mesa AZ.

Sponsored

 

[Mike Pfeifer]

For the roof, maybe there was one of those plastic protection sheets applied? That is weird.

 

[aham23]

Cruise season is here in AZ!!!

 

[aham23]

First legit real driving Sunday followed up with quick maintenance wash.

Cup 2s are so sticky…..and causing rock chips down the sides at 300 miles.

New rubber coming my way this Friday via Lugwrench Hero; Mich PS4s.

 

[aham23]

 

[aham23]

Ok 388 miles so let’s get new rubber.

Decided to use https://lugwrenchheroes.com/ and I was not disappointed. They were 5 Star all around!

Swapped out the Cup 2s for Michelin PS4. Same staggered set up as stock.

So who needs some Cup 2s in AZ?!!?

 

[skinnyb]

Looks fantastic! The Adam’s products are great. My dad and I put the Advanced Graphene Coating on his truck and my mom’s CT4-V and it was super easy to work with. Nice to hear the Graphene Spray is easy to work with as well. Enjoy your ride!

I agree about the Graphene spray. I just got done doing mine yesterday. Did a wash, Iron remover, clay mit then a wipe down with IPA and applied afterward. Very easy to put on, easy to remove. I then followed up today with a coat of Beadmaker. Very happy, should work for quite a while I hope.

 

[skinnyb]

Ok 388 miles so let’s get new rubber.

Decided to use https://lugwrenchheroes.com/ and I was not disappointed. They were 5 Star all around!

Swapped out the Cup 2s for Michelin PS4. Same staggered set up as stock.

So who needs some Cup 2s in AZ?!!?

Beautiful car, looking good

 

[aham23]

I agree about the Graphene spray. I just got done doing mine yesterday. Did a wash, Iron remover, clay mit then a wipe down with IPA and applied afterward. Very easy to put on, easy to remove. I then followed up today with a coat of Beadmaker. Very happy, should work for quite a while I hope.

Nice. Let me know how Bead Maker holds up. I read it can attract dust. We got lots of that in AZ. I topped mine with Adams Graphene Detail spray.

 

[DFB5.0]

Looks fantastic! The Adam’s products are great. My dad and I put the Advanced Graphene Coating on his truck and my mom’s CT4-V and it was super easy to work with. Nice to hear the Graphene Spray is easy to work with as well. Enjoy your ride!

I have been liking Adam's Graphene Tire Dressing lately.

Seems to leave a really nice natural sheen with minimal working required to get an even coat. Smells nice as well.

I agree about the Graphene spray. I just got done doing mine yesterday. Did a wash, Iron remover, clay mit then a wipe down with IPA and applied afterward. Very easy to put on, easy to remove. I then followed up today with a coat of Beadmaker. Very happy, should work for quite a while I hope.

Nice. Let me know how Bead Maker holds up. I read it can attract dust. We got lots of that in AZ. I topped mine with Adams Graphene Detail spray.

Bead Maker's longevity is not especially long, a month or two at best. But it's just so nice to use that reapplying is not a chore, especially if you use it as a drying aid.

Dust attraction does seem to get mentioned a lot with Bead Maker. I can't say I have noticed it any worse than other spray sealants. Because Bead Maker adds a considerable amount of gloss, this tends to highlight dust particles more than normal. But that is dust that is in the air anyway rather than attracting it like a magnet.

 

[MAGS1]

I have been liking Adam's Graphene Tire Dressing lately.

Seems to leave a really nice natural sheen with minimal working required to get an even coat. Smells nice as well.

Bead Maker's longevity is not especially long, a month or two at best. But it's just so nice to use that reapplying is not a chore, especially if you use it as a drying aid.

Dust attraction does seem to get mentioned a lot with Bead Maker. I can't say I have noticed it any worse than other spray sealants. Because Bead Maker adds a considerable amount of gloss, this tends to highlight dust particles more than normal. But that is dust that is in the air anyway rather than attracting it like a magnet.

Looks good I’ll have to give it a try!

 

[aham23]

When sticker mods go wrong. :(

 

[aham23]

wowzers. i only had one real driving and 388 miles with the CUP2s. went back to the same stretch of mountain road yesterday with the PS4s and.......sorta want CUP2s. the car was way more planted in the corners. like it was being sucked to the ground.

the CUP2s just toss all the AZ road debris down the car sides though. not to mention they would not last more than 5k miles of spirited driving here.

it was cool to experience the difference and gain the knowledge though. had no clue it would be so dramatic.

now back to decal mods.

 

[aham23]

Therapy Sesh Today.

 

[MAGS1]

Therapy Sesh Today.

That’s good therapy right there

Sponsored