2016 mustang gt max effort n/a

[Nekko]

This is my 2016 gt mt82
Bone stock baseline run 13.08 @ 109mph with a 2.0 60'

Just put it up for the winter, and going to start tearing it down.
My goals is to try to beat 10.4 @129 stickshift

Let it begin!

Sponsored

 

[Nekko]

Does N/A stand for nitrous?

Nope. All motor, also going to try without changing displacement, nor compression

But before power mods I'm attacking the irs

 

[givemeadollar]

Get a real power adder and have a faster and better car than any N/A coyote will ever be and it will cost less...

 

[Nekko]

Steeda did a 18 auto, I know not the same as a 15-17 manual , 9.9x @like 139 n/a

And yes I know throw a power adder, be faster. But already have one with a power adder 2013 with Gen3r

 

[Nekko]

Without some massive weight loss I just don’t see it happening. Not trying to kill a dream but....

Not really a dream just a goal if I don't make it then it's knowledge of the journey

 

[Nekko]

With enough money it can be done. Props to you for trying. Now start shedding those pounds.

Yeah weight will definitely have to be addressed, im hoping 3300 with me and 5gallons of e90

 

[Strokerswild]

Predictably, it didn't take long for the power adder crowd to arrive....

As an engine guy, I'll be watching this one to see if your parts list jives with the one in my head.

 

[Nekko]

Predictably, it didn't take long for the power adder crowd to arrive....

As an engine guy, I'll be watching this one to see if your parts list jives with the one in my head.

I dont mind them, coyotes make tons of power with power adders, but also makes tons in all motor.
As for my list so far , I've order only steeda stop the hop kit

But for my build plan on the power side, currently working on just suspension and irs

Mhs stage 3 cnc porting
Stage 3 mhs cams
Ported cj
Steeda enclosed intake
ARH 2" longtubes
Pbd tune e85

Might change might not

 

[Kermitz]

I dont mind them, coyotes make tons of power with power adders, but also makes tons in all motor.
As for my list so far , I've order only steeda stop the hop kit

But for my build plan on the power side, currently working on just suspension and irs

Mhs stage 3 cnc porting
Stage 3 mhs cams
Ported cj
Steeda enclosed intake
ARH 2" longtubes
Pbd tune e85

Might change might not

Might want to throw in OPG/CS while you're having the cams installed. You're more than likely going to have to rev that thing over 8000 and it's better safe than sorry.

 

[Nekko]

Might want to throw in OPG/CS while you're having the cams installed. You're more than likely going to have to rev that thing over 8000 and it's better safe than sorry.

Definitely, my 13' has mmr, it's a must have!

Sponsored