wheel

  1. What would cause the steering wheel to be slightly off center ?

    Long story short over the summer I had to veer off the road and into the mud. The car had to be winched out by its wheels (they tied a rope around each wheel and pulled me up. I’ve noticed that the wheel doesn’t seem 100% straight. The dealer checked the alignment and found no issues. My tires...
  2. anyone ever run + 15 offset?

    I know + 30 is the standard, just curious
  3. How did he put a 265/35/18 on a 18x5

    I don't understand how a 10.4inch wide tire could squeeze onto a 5inch wide wheel....
  4. Do you think having the car winched out of the mud by a wheel would’ve damaged anything ?

    So I got my car stuck in some mud and had to be winched out. They tied a rope through the wheels and winched me out that way. Do you think that could have caused any damage? I’ve noticed sometimes it will jolt itself over a little bit, but I’m not sure if that’s attributed to tram-lining due...
  5. Too wide wheelbase and missing tube?

    Hi guys I am new to Mustang and about to buy my first Mustang on Carmax. However when I visiually checked the target car's condition, I found two weird things compared to other mustang: 1. The wheelbase of my target is obviously wider than other Mustang GT with PP1. Although I have confirmed...
  6. Florida 18+ Carbon Fiber Steering Wheel from So Cal Garage Works

    Well I bid this forum farewell. I’m done with ICE going the way of EV I will however remain in the family! Looking forward to getting my new 2022 MME in the coming months….parting way with this gorgeous car & steering wheel! I paid around $635 brand new, this wheel is slightly used! I'll...
  7. Is This Rim Repairable?

    Hey guys, My car hit a pothole the other day and it slightly bent one of the wheels. It's not leaking air for now and it seems like there's no vibration/handling issues on the highway. Should I even try to find a place to repair it or just get a new one? Anyone has single takeoffs willing to...
  8. Wheel spacing question 2019 Mustang GT

    I just bought and installed RTR wheels. They are 19x9.5 with a 33mm offset in the front (275/40/19). The rears are 19x10.5 with a 45mm offset(285/35/19) I had stock pp1 wheels but added 25mm hub centric spacers all around. I replaced the wheels with the RTR's but did not remove the spacers. I...
  9. California 4 stock 19 inch aluminum wheels + PS4S tires

    Selling the stock wheels from 2015 ecoboost wheels/stripe package. Unnoticeable minor scratches on 2 of the wheels, no TPMS sensors. Micheline PS4S Tires have 25K miles on it, still have 10k left if regular driving. Local pick up in Los Angeles area. Asking $350 OBO, open to reasonable...
  10. Blow out split my subframe I think?

    My oil gauge has been sitting high recently so I was cruising on the highway in fourth trying to keep revs up to keep it in the normal range when all of a sudden my drivers side rear tire just blew up. Got it on a tow truck and discovered that side of the subframe split right in two and now I...
  11. BLACK FRIDAY S550 Premium wheel decals!

    $7 regular colors and $8 for carbon. PM me for your Paypal order. :)
  12. 2020 Shelby GT500 CFTP damaged carbon fiber wheel + repair process! (video)

    In this video, I show damage on one of my 2020 Shelby GT500 CFTP front carbon fiber wheels. I talk about how it happened and then walk though where to send damaged wheels for repair as well as their repair process.
  13. Ok to rotate same-size tires on staggered wheels?

    I have 305 width tires all around, but my wheels are staggered (10.5 front, 11 back), so the front tires are a little bit meatier. Is it okay to rotate the those front tires from the 10.5" front wheels to the 11" back wheels? The tire/wheel shop that put them on said it is not a good idea, so...
  14. Looking for pics of stock GT350 rims on 305/30 square setups

    Trying to figure out what to do with the next set of tires since it's almost time. I daily my GT350 so the smaller sidewall of 305/30 makes me nervous but it's also the only size that has available tires. I was looking at ExtremeContact Sports, NT555 G2s, and PS4S. I would love to see what this...
  15. Is a 1510 lb (650 kg) load-rated wheel ok for amateur track days?

    I'm considering these: http://vsforged.com They're all fully forged, but with a load rating of 650kg/1510lb. What sorts of driving would I need to do to break them? I'm not a NASCAR driver, just a guy with a Shelby who wants to go to a track for the first time. In particular I want to go to...
  16. Nitto NT01 tires, 305/30zr19 front, 315/30zr20 back?

    Hello! Newb here. I did do some homework, but still have questions! I'm thinking to get Nitto NT01's for my 350 (non-R), 305/30zr19 on the front, and 315/30zr20 on the back, to deviate from the stock Michelin PSS and try something new. I chose those Nitto tire sizes because they both have (Y)...
  17. Need help with Niche wheels fitment

    I recently got new niche wheels which are 20x9 +35 in the front and 20x10.5 +40 in the rear equipped with 275/35 the front and 295/35 in the rear and I’m on stock suspension The front looks perfect but rear is poking out of the fender wall and I’m not sure if i got wrong wheel size or something...
  18. Michigan 2019 Black Accent Package Wheels/Tires

    Selling my stock black accent package wheels and tires from my 2019 GT. They were taken off with between 6500-7000 miles. Lots of tread left. Tiny scratches but no road rash. They are in good shape. Looking for $400. Local only. P Zero Nero 255/40-19 tire. 19x8.5 inch wheel.
  19. Advice on "street" drag pack

    I'm looking to pick a set of Forgestar D5 (17x10) for the rear. For the front I'm debating between a 17x7 and a 17x10. I will be running nitto 555r2 305/45r17 in the rears and a regular street tire (like a nitto 555g2) for the front. I have read that you do not want a large tire in the front...
  20. Misc parts- Weather tech Mats/ Roush Scoop/ Black Hood Vents

    Cleaning out my garage sale! Pickup in Houston, TX area Not sure about shipping, but don't think it would be much for the smaller items. Prices are pickup, but can work out something with shipping. Project 6GR windshield banner & license plate cover - $20 or $10 each 15-17 Black OEM Hood Vent...
Top