Sponsored

engine

  1. Cracked my coil pack trying to unthread bolt

    Went to check gaps on all of my spark plugs and while trying to loosen the bolt that holds one of the coil packs in , the plastic completely broke off where the bolt holds down the coil pack. That bolt was on TIGHT. I'm wondering if I need to replace the coil pack asap or if it will be fine. I...
  2. Change broken American 2.3 EB engine for an European one possible?

    Hi there, So as the thread says, do you know if its possible to put an european (valencia) engine in an american imported 2.3 EB??? The mechanics here at ford (spain) don't want to give any warranty (and its 12k euros...) because the car is american and apparently there's no communication/link...
  3. Why did my engine cut?

    My car isn't being used much with the current lockdown, it's tucked away in the garage and every 4 or 5 days I start it up and let it run for 10 minutes or so before shutting it off. This morning, I started it up and went back in the house, I got completely distracted with work and by the time...
  4. Car's engine shuts off on neutral (2015 Ecoboost) Throttle Body?

    hello, I have a 2015 Mustang Ecoboost premium in manual transmission and every here n there the car would start making a weird sound while cruising down the street, which would lead to the engine shutting off once i reached a point where i would have to pass by the neutral position on my gear...
  5. Pennsylvania 2017 Ecoboost engine mounts

    Left and right mount $50
  6. Maddening misfire issue between 3200 and 4200 RPM

    First let's get all the details of the car and what has already been tried before I even go into what is happening: I will take it to the dealer, I just like to be as informed as possible before I do, and the only dealer around here with an SVT certified tech has a 20 deep waiting list. 2017...
  7. 2019 5.0 Slap? Should I Bring It In? HELP!!!!

    Hello, I recently got my 2019 Mustang 5.0 last Month. Did an oil change around 600 miles. Everything was done by the book but now I have this terrible slap? Do you think Ford is going to help me out? How bad is it from the video I included. Any help would be great! Thanks Here is the link to...
  8. New Build...But Not An S550... Think Old School

    Fulfilling a bucket list item of mine and building an old school Mustang. I picked up this 1967 Mustang coupe "c" code car on 5/28/2019. Had been looking for about a year months tying to find something that was in my scope of ability and was the right price. She was restored 12 years...
  9. My Terrible Experience with Service at Star Ford

    As I keep finding issues related to my car being serviced at Star Ford last summer I feel I should let others be aware as it continues to infuriate me. In July 2018 I took my 2018 Shelby GT350 with 7k miles in to have the engine replaced, it had a mechanical failure which apparently isn't an...
  10. S550 engine parts

    Various engine parts and pieces for sale, S550 GT standard throttle body S550 GT intake manifold S550 GT engine mounts Front shock tower brace Offers welcome on any pieces you may want
  11. Video: Weird Noise - Anyone Else Have This Issue?

    My car has been at the dealer since October 19 and they still can't figure out what the issue is. Fortunately it's under warranty but I'm not paying a car note each month to have it sit at the dealer. So far they have thought it was the following Coolant leaking on the belt. They replaced the...
  12. Under body cover to protect engine

    Hello All, After accidentally ending up on a muddy road, I noticed my engine bay is fully covered in splashed mud. There I noticed there is no body cover under the engine to protect it from mud, salt, etc. splashing from the road. I called the dealer, and they said my model (2017 ecoboost...
  13. 2018 Mustang GT 5.0 Issues?

    Hey All! I wanted to make a thread for all to come and discuss their issues with the new 5.0. I am hoping to get some numbers and a summary of the issues that are going on. Some people have gotten new small blocks, new long blocks, Ford Buy back, or nothing at all. List your issues here and Ill...
  14. What to worry about with long tubes??

    Hey everyone, I've been wanting to put long tubes on my car for a while. I'm no mechanic or anything. I do know it's not as easy as simply just throwing the headers on. There's a lot more I need to worry about. Can anyone tell me everything I need to take into consideration if I get long...
  15. Engine Plenum Cover and Injector cover paint

    Paint process: Remove injector overs from car Wash with mild soap and water use 600 grit sand paper and lightly rough up all of the cover except the middle that is taped on figure 2 apply painters tape through middle of each cover use sharp blade to cut the tape in line with rivets on each...
  16. Ecoboost making unusual noises

    My 2017 started making weird sounds on acceleration and when I let off the accelerator and leave it in gear. also when I move the shifter to the left . Any help is appreciated. Took it to my dealer and they had no idea what it was.
  17. California FS: OEM Motor Mounts - Base Mustang GT

    Just went through my garage to clean out some stuff for more space and stumble upon my old parts. All parts are OEM and taken off with less than 1000 miles from a base model 2017 Mustang GT. I am located in Sacramento, CA for local pick-up. OEM Motor Mounts - $70 OBO Local Pick-Up (85 Shipped)
  18. GT PP Stock Throttle Body

    Hello Fellow Forum Members!!! Just did a Roush SC install on my 2016 GT PP. Have a few factory and aftermarket parts that I am selling. All prices will include shipping to the 48 contiguous states. Please feel free to make an offer if you are willing to haggle. Thanks guys and gals. - GT PP...
  19. GT PP Intake Manifold (w/fuel rail & injectors)

    Hello Fellow Forum Members!!! Just did a Roush SC install on my 2016 GT PP. Have a few factory and aftermarket parts that I am selling. All prices will include shipping to the 48 contiguous states. Please feel free to make an offer if you are willing to haggle. Thanks guys and gals. - GT...
  20. GT PP Stock Cold Air Intake ( w/all plumbing)

    Hello Fellow Forum Members!!! Just did a Roush SC install on my 2016 GT PP. Have a few factory and aftermarket parts that I am selling. All prices will include shipping to the 48 contiguous states. Please feel free to make an offer if you are willing to haggle. Thanks guys and gals. - GT PP...





Top