Search results

Which are the best, most reliable, and OEM looking turn signal out there. I would like them to operate as DRL's and then switch to turn signal when indicating. Not fussed with the sequential turn signal part. Only issue is i need them to work on an EU mustang. Any help would be greatly appreciated!

Anyone been able to get their hands on one of these yet? or how much these babies will cost?

So , I installed my Steeda RLCA bearings a few months ago, and on the initial test drive everything was peachy. All really good. I did maybe 100 miles on them no problem. I then had to go to sea for work for a couple of months, and came back last week, and took the car out for a drive. I...

Anyone know of anyone making chopped carbon fibre parts for the mustang yet? In particular i would love to replace the brushed aluminium dash.

So, there have been a few discussions on here, especially in the track forums area, about upgrading to the GT350 brakes and to be careful with the brake balance. That if you do the rears you have to do the fronts to keep the brake balance the same, so i did a bit of number crunching to try and...

Does anybody know the The PID values for ford in hexadecimal format? I'm running the RaceCapture app, and it gives me the ability to add OEM specific PID's but i need to convert and add in hexadecimal, but for the life of me can't find them. I've got something from a ford manual, but doesn't...

Does anyone know of anywhere that makes a GT 5.0 emblem in the style of the shelby gt350 and gt500?

Does anyone know where to get the same material as the original trunk liner walls? I want to make a custom enclosure on the side of the trunk and want to match the material to make it look OEM. Thanks!

Has anyone tapped in to the MyColor circuit to add more lights to the interior whilst still keeping MyColor functionality? In particular i want to add a small LED in the overhead console to add a very subtle light to the centre console / dash area, but want it to change colour with the rest of...

Hi there, I've sent you a PM for pricing on a torsen diff and a few other bits. Just wanted to make sure you got it? Thanks

Those with knowledge and experience with the aluminium differential carrier chime in please. I'm looking at swapping out my cast iron unit for an aluminum one, as i'm going to be road racing the car (only track days, nothing competitive), and i want to reduce / offset weight. I'm adding a full...

Just noticed that the rear brakes on the GT500 are 14.5" compared to the GT350. I would assume that has to do with the vehicles heavier front bias. However, hopefully these will also be made available to the public as I feel it would make a better match for the PP brembo fronts.

Anyone know the piston diameter of the rear brakes on the GT? I'm looking into a little project retrofitting some brembo 2 piston calipers from an EVO X, or 350z, and just want to make sure i keep the bias as close as possible to stock, or even a slight increase in rear bias. I would measure it...

Hey everyone. I'm getting the filter relocation kit from MMR, and will be adding a large Setrab oil cooler and oil thermostat. Running -10 lines everywhere. My question is, does all the oil go through the cooler? or is there a bypass built into the engine that diverts only some of the oil to the...

So, went to the dyno the other day, to see what i'm getting. Unfortunately i never got a baseline when the car was stock so hard to tell the gains. Car is a 2017 GT Manual, with FRPP Touring catback, and Ford Power Pack 2 I went in with the intention of getting the most realistic real world...

Anyone have any input? Ford Performance M-6375-M50 or Exedy EF502A? Both are steel, and lighter. Ford advertises as 9 pounds lighter than previous version but i don't know what that means compared to stock. Exedy, i can't find any info on weight. I'm planning on running the Exedy Stage 3 Mach...

Would a set of Comp Stage 1 cams with an F150 manifold work? If i was only looking for around 440 ish rwhp, and only revving to stockish numbers, 7200-7300. Wouldn't this combo on paper at least produce the numbers whilst retaining the maximum amount of torque at the same time? I know it would...

Anyone ever had an engine map from V Performance in Poland? www.v-performance.pl

Anyone ever had an engine map from V Performance in Poland? www.v-performance.pl

Ok, so i'm about the wine a FRPP2 calibration to my PCM with HP Tuners, but its telling me that the Operating System ID's don't match, and do i wish to continue. My car is an EU car with an OS system number HR3A-14C204-UD, and the file i have has an OS system number of MGMPJ56, from a US car...