That is helpful, thanks. I did not change up the wheels, just the tires.if all you did was change the tire size then there's no need. However, if you change your wheels to a true square setup, you will likely need spacers in the front. I run a square setup from Apex wheels with a 25mm spacer in the front.
All good then, but you cannot rotate tires this way without dismounting them from the wheels. Most people who do a "square setup" are really referring to the same size wheels and tires and keeping offset the same so that you can unbolt the wheels to rotate. This is what requires the move to a spacer and extended studs up front.That is helpful, thanks. I did not change up the wheels, just the tires.