Sponsored

Track Square Set Up

Sarman67

New Member
Joined
Jun 18, 2026
Threads
2
Messages
4
Reaction score
0
Location
Michigan
First Name
Raj
Vehicle(s)
2020 GT350
Getting ready for first track day with my 2020 GT350. I went square with 305/35R19. I did not think there would be an issue, but I am seeing some noting the need for a spacer upfront. Any experience to share?
Sponsored

 

John S

Well-Known Member
Joined
Jul 26, 2022
Threads
48
Messages
752
Reaction score
569
Location
Novi, Michigan
First Name
John
Vehicle(s)
2022 Mach 1 HP
I run square 19" X 11.5" ET56 with a 35mm spacer in front to maintain a proper scrub radius. (I also have the Mach 1 fender lip to hide any poke)
 

saleen367

Well-Known Member
Joined
Aug 9, 2015
Threads
18
Messages
641
Reaction score
589
Location
MN
First Name
Jeff
Vehicle(s)
2022 Mach 1 HP N3451 2021 GT500 CFTP M1913 2015 Focus
A square setup refers to the same wheels front and back so you can rotate to preserve tire life.

I can't speak for the GT350, but GT's and Mach 1's will require extended front studs and wheel spacers.
 

Sponsored

Deadly0ne

Well-Known Member
Joined
Dec 7, 2018
Threads
6
Messages
123
Reaction score
53
Location
OK, USA
Vehicle(s)
2020 GT350
if all you did was change the tire size then there's no need. However, if you change your wheels to a true square setup, you will likely need spacers in the front. I run a square setup from Apex wheels with a 25mm spacer in the front.
 

rocsteady

Well-Known Member
Joined
Jul 23, 2017
Threads
34
Messages
462
Reaction score
581
Location
South Jersey
First Name
Dave
Vehicle(s)
2024 Ranger Raptor; previous was the 2019 Shelby GT350
I suppose there's a wheel offset to get away with it but with the wheels I had purchased, extended studs and a spacer were a must. (MRR FS01 19x11 5x114.3 50et 70.5B, extended wheel studs and a 25 mm spacer).

1788875050500-sj.webp
 
OP
OP
Sarman67

Sarman67

New Member
Joined
Jun 18, 2026
Threads
2
Messages
4
Reaction score
0
Location
Michigan
First Name
Raj
Vehicle(s)
2020 GT350
if all you did was change the tire size then there's no need. However, if you change your wheels to a true square setup, you will likely need spacers in the front. I run a square setup from Apex wheels with a 25mm spacer in the front.
That is helpful, thanks. I did not change up the wheels, just the tires.
 

mavisky

Well-Known Member
Joined
Nov 17, 2018
Threads
12
Messages
2,402
Reaction score
3,304
Location
Cumming, GA
First Name
Kyle
Vehicle(s)
2018 GT350
That is helpful, thanks. I did not change up the wheels, just the tires.
All good then, but you cannot rotate tires this way without dismounting them from the wheels. Most people who do a "square setup" are really referring to the same size wheels and tires and keeping offset the same so that you can unbolt the wheels to rotate. This is what requires the move to a spacer and extended studs up front.
 

SBR70.3

Well-Known Member
Joined
Mar 13, 2017
Threads
48
Messages
607
Reaction score
987
Location
Edmond, OK
First Name
Chris
Vehicle(s)
2021 Mach 1, 2023 Explorer ST, 2019 GTI (back up track toy), 2026 Colorado ZR2
 








Top