What did you do to your S550 Mustang today?!

[Sycostang67]

Put a new battery in the car as the never start that was in it when I got wasn’t cutting the mustard. Lasted longer than I expected though. I did the bms reset but also had to relearn all the tpms sensors which seemed odd since the radio retained all its info.

Sponsored

 

[emg75189]

Got her all shined up for cars and coffee drove out of the driveway then realized I’m 7 days early. Will have to wait till next Saturday!

What did you do to that bottom part of the bumper, right above the splitter/lip? It's usually whatever the color of the car is, yours is black to blend in with the lip. How did you do that? I wanna do the same. Thanks in advance.

 

[Slow Yote]

What did you do to that bottom part of the bumper, right above the splitter/lip? It's usually whatever the color of the car is, yours is black to blend in with the lip. How did you do that? I wanna do the same. Thanks in advance.

I have mine painted, or you can wrap it.

 

[Keithfro]

What did you do to that bottom part of the bumper, right above the splitter/lip? It's usually whatever the color of the car is, yours is black to blend in with the lip. How did you do that? I wanna do the same. Thanks in advance.

I wrapped it with matte black vinyl wrap.

 

[The Spider House]

I wrapped it with matte black vinyl wrap.

Pic or not true ha ha

 

[Keithfro]

Pic or not true ha ha

I did do pics look 3 posts prior!

 

[emg75189]

I did do pics look 3 posts prior!

Did you do it yourself or pay a shop? If so how much was it? If you did it yourself, where did you get the Mattel black vinyl from?

 

[Keithfro]

Did you do it yourself or pay a shop? If so how much was it? If you did it yourself, where did you get the Mattel black vinyl from?

I did it myself. Loosened the bottom trim so I could wrap underneath and took my time applying wet with squeegee.

Here is what I purchased from Amazon. I like using wrap so it is not permanent.
Black Matte Car Wrap Vinyl Roll... https://www.amazon.com/dp/B07PRNGMK9?ref=ppx_pop_mob_ap_share

 

[The Spider House]

I did do pics look 3 posts prior!

Ah gotcha. I didn't make the link ha ha. My bad. Looks good

 

[JTM88]

Took advantage of the warm dry weather today to wash the GT and do my quarterly engine bay clean.

Really happy with how well Griot’s Engine Cleaner and Koch-Chemie Motorplast work to clean and shine the engine bay.

I also installed the UPR dual valve catch can a few weeks ago and decided to leave the engine cover off. I actually like the look better without it.

 

[5doorsoffury]

installed a 4 psi hobbs switch for the high on my brushless controller(jumped out atm) . its tapped off my mech boost gauge. I also swapped the oem manifold to pass inspection. stock toon took 3 drive cycles to pass...

 

[rxryanm]

Started the unwrap journey today. This mod is hands down the biggest pain in the nads to date.

 

[MAGS1]

Started the unwrap journey today. This mod is hands down the biggest pain in the nads to date.

Rent a steamer

 

[Crayon]

at the gym today. My car with a local S650

 

[Alerch]

Picked up new rubber, 305’s squared. Getting it ready to list for sale if anyone might be interested.

Sponsored