What did you do to your Mach 1 today

[Roady68]

My first mod to my 2023 Mach 1. Oil catch can. I am sure more changes will be coming this winter

Sponsored

 

[WD Pro]

Hi, there are 2 lines in the ipc, one for the gauge and one for oil pressure sensor.

Thank you

Does your gauge actually work ? (It looks maxed out at 1250 rpm).

If it does, please could you share both lines of code ?

If you don’t already have it, you can also turn on the axle temp.

WD

 

[Ianv8stang]

Yes gauge works fine it was on cold start at time of picture. All i did was enable the two lines in the picture below. ( in the ipc)

 

[murick]

Yes gauge works fine it was on cold start at time of picture. All i did was enable the two lines in the picture below. ( in the ipc)

Mirrors autofold, Mirrors tilt on reverse and Odometer delta definitely caught my attention!

 

[Rael]

Mirrors autofold, Mirrors tilt on reverse and Odometer delta definitely caught my attention!

But our mirrors don't fold electronically. Isn't that a prerequisite?

 

[shogun32]

But our mirrors don't fold electronically. Isn't that a prerequisite?

yes it is. But can't you feel the excitement of software features that magically transgormify into physical manifestation? Let's see, the Challenger has had electric-motor-driven mirrors for how many decades now?

 

[Rael]

I'll be dead long before transgormification.

 

[IPOGT]

I'll be dead long before transgormification.

It’s already happening. The clues are all around us.

 

[murick]

But our mirrors don't fold electronically. Isn't that a prerequisite?

Yours don't, but ours do .

 

[Snakebyte]

Yours don't, but ours do .

I've been around your a few of your European city streets, and you "need" folding mirrors for sure.

 

[TallyMach1]

Got some goodies delivered today. Installed the overflow tank cover, then fought with the front rotors to free them from the hubs. Still need to work on the rears, hopefully they'll be easier, but also need to get some anti-seize so the new parts don't do the same thing.

 

[Tmpst]

Went to Boulder, Co for the Shelby American Collection’s 28th annual show. Lots of awesome mustang history there, people, and extra cars to see today.

 

[Prodigal]

Did a few small things that I’ve been putting off for no good reason.

1. swapped my steeda low profile jacking rails for steeda full length. The extra 15” of usable rail length will fit my 7000 series quick jacks much better.
2. Adjusted up my defouler on my LTH to make sure they’re out of harms way. I had plenty of cable but rotating the defouler up makes me feel better
3. Installed Steeda trunk pop kit. While I was at it I discovered the bumper button to open the trunk. Am I the only person on the planet that didn’t know this existed? I always used the fob. Nice. The steeda No wing/small wing kit works perfectly with my gt350 wing. Nice controlled to full open.

 

[fast306stang]

Went to Boulder, Co for the Shelby American Collection’s 28th annual show. Lots of awesome mustang history there, people, and extra cars to see today.

That Lola!!

 

[Tmpst]

That Lola!!

And to listen to Allen talk about how he got her took the cake for the day!

Sponsored