Search results

Have done my mach 1 with forscan. Go into ipc and tick the box for oil pressure sensor and oul gauge. It will then appear in the gauges selection on dash. Set units to psi on dash as bar seems to max out on cold start.

Yes gauge works fine it was on cold start at time of picture. All i did was enable the two lines in the picture below. ( in the ipc)

Hi, there are 2 lines in the ipc, one for the gauge and one for oil pressure sensor.

Yeah look at top of attached picture. Dont know if it works yet but will enable it at weekend and see what happens.

It was yes only got it today but really impressed. I asked Ford on the first service and they didnt know why the option wasn't there. There seems to be lots of options like auto fold mirrors and oil temp so will be having a good play at weekend. 🤪

I enabled my oil pressure gauge that was nowhere to be found in the gauges menu.

Glencoe, Scotland

as said above replacing the release bearing is good practice while box is out. The slines are dry on the shaft so plate would of been sticking on them as they should always be greased before fitting box. In not sure but looking at the picture the splines look badly worn, again due to no lubrication.

Looks like friction plate was sticking on input shaft to me. That would explain trouble selecting gears when stood still and box not coming out easy.