SYNC 3 swap, It's all in here

[HextallS550]

@Det_Riot You know we’re In Dearborn, right?

Sponsored

 

[Det_Riot]

@Det_Riot You know we’re In Dearborn, right?

lol I do now. I'm usually mobile scrolling so i don't pay too much attention to the locations on the profiles I"m in Shelby Twp now but still not too far. My parents still live at cherry hill and tele lol

 

[BlownGP]

I've sorted through this thread about 800 times, and honestly the more I read the more I get confused lol my situation is a little unique but application is fairly straight forward.

I have a full 2018 base car interior swapped in my 94 GT. It has all of the modules from the s550 so for sake of this discussion, I have a 2018 base get.

At one point while parking the donor car out, I sold the base screen, bezel, and ACM out of it because I thought I was going to do something along the lines of the dynavin. I've sinced decided against it and want to stick with the ford components so here's what I installed currently:

-Sync3 APIM From 2018 car
-2017 GT350 Bezel
-NO ACM Since I sold it and I'm a doofus.

I have available from another car I just purched a Full Sync 3 system from a 2016 GT Premium.

I havent changed any of the wiring from the base wiring so I know that's why things aren't working, as well as the forscan updates.

At this point i'm thinking that I can scalp from the 2016 car:
Carplay Hub
2x under the center console usb plugs
ACM

Is there anything additional that I would theoretically need? Can these components be used with the 2018 APIM & Body wiring? HALPPP

If the Sync3 APIM from the 2018 car had the 8" screen.

Then you just need
8" screen. Didn't say you had one. Just APIM
Bezel which you have
GPS antenna
Carplay hub
ACM since you sold it

and a little forscan programing.

 

[Fishels]

Got a 15 here. I was under the impression that it was only CarPlay that needed an updated usb port and that android auto was fine? Am I wrong?

I hope changing that is not too hard. Are there any car shops besides a dealer that would do the whole process? I think I can do it but don’t want to lol

 

[Crew]

Currently running Carplay/AA media hub, "HU6T-14F014-AC".

Can I swap in a, "GJ7T-14F014-AC" (2xUSB), without any issues?

 

[HextallS550]

Got a 15 here. I was under the impression that it was only CarPlay that needed an updated usb port and that android auto was fine? Am I wrong?

I hope changing that is not too hard. Are there any car shops besides a dealer that would do the whole process? I think I can do it but don’t want to lol

Give us a call 855-HEXTALL. It's very easy to install and we have special pricing for Mustang6g members.

 

[HextallS550]

Currently running Carplay/AA media hub, "HU6T-14F014-AC".

Can I swap in a, "GJ7T-14F014-AC" (2xUSB), without any issues?

You will lose functionality of the USB port that is under the Start/Stop button. The APIM can only accommodate 2 USB connections. In addition, any media module with a G prefix will not allow CarPlay.

 

[Crew]

You will lose functionality of the USB port that is under the Start/Stop button. The APIM can only accommodate 2 USB connections. In addition, any media module with a G prefix will not allow CarPlay.

Good to know! So I wouldn't get any closer to having my USB stick + Motorola MA1 hidden in my center console. Dang.

Is there a 2xUSB module that allows CarPlay/AA, even if I lost front USB functionality ?

 

[Dave2013M3]

Guys Tom is the man...he helped me and my car has been flawless for over 2 years now.

 

[HextallS550]

Good to know! So I wouldn't get any closer to having my USB stick + Motorola MA1 hidden in my center console. Dang.

Is there a 2xUSB module that allows CarPlay/AA, even if I lost front USB functionality ?

If you're running Sync 3.0 use a media module from a 2017-18 F150.

 

[Crew]

If you're running Sync 3.0 use a media module from a 2017-18 F150.

Thanks as always, Thomas! You're the man!

 

[StangTime]

Good to know! So I wouldn't get any closer to having my USB stick + Motorola MA1 hidden in my center console. Dang.

Is there a 2xUSB module that allows CarPlay/AA, even if I lost front USB functionality ?

I have this dual USB hub in my console: HC3Z-19A387-F

 

[Crew]

I can't find much online about, "HC3T-14F014-BE" (might not be the correct last digits) - any ideas?

I have this dual USB hub in my console: HC3Z-19A387-F

Thanks! Looks like EXACTLY what I'm going for - are those blue LED's ? Could use some extra light in the center console..

 

[StangTime]

Thanks! Looks like EXACTLY what I'm going for - are those blue LED's ? Could use some extra light in the center console..

Yes. Same color as the other backlighting in the car.

 

[HextallS550]

I can't find much online about, "HC3T-14F014-BE" (might not be the correct last digits) - any ideas?

That's an engineering number, not a part number. Order a HC3Z-19A387-F

The blue lights are not that bright though. They're the same as what you probably have.

Sponsored