If it's peeled back then chances are the vinyl adhesive is probably already compromised with contaminates. I would be VERY hesitant to use any kind of gorilla glue to stick it back down.
3m 77 adhesive is what i would use. Tape off the bumper around it, and be delicate with how much you apply...
I mean that customers provide me their plates and I provide vinyl wraps over their existings for those who have stamped plates.
I also have recently gotten blanks for people who just want dedicated show plates that would never be ran as their daily.
Can’t speak for other states but in Michigan, it’s a gray area at worst. All of our laws specify modifications to plates altering the designated registrations so as long as the numbers are as legible or more from ~100ft away, we’re good to go here. I use reflective vinyls where I can to ensure...
Up for sale are a near perfect set of Apex Wheels VS-5RS. These are the forged versions coming in at just under 20 lbs a wheel. The wheels are in excellent condition, finished in their anthracite finish with only one hardly noticeable chip (shown in pictures).
Perfect fitment for any S550 GT...
I would go ahead and order the anchors without nuts. I can't remember off the top of my head but I believe my helmet (same as you have) came with screws already installed in the hans attachment point holes. If not, you need a small 6mm allen head bolt...
dumb questions first: is the started removed?
Second statement: If it's not coming out, the input shaft is seized up in either the clutch discs or the pilot bearing.From the angle you took the pick it looks like the trans is tail down to a parallel sitting engine. Trying leveling out the...
Option 2 is your best option overall. You'll start tearing up those aluminum housings unless you do all of the hardcore bracing that's out there for the super 8.8's. At least with the iron case, you'll cut down on some of the NVH and only have to run the standard IRS braces. If you race heavily...
lol I do now. I'm usually mobile scrolling so i don't pay too much attention to the locations on the profiles :crackup: I"m in Shelby Twp now but still not too far. My parents still live at cherry hill and tele lol
I have an entire 2016 GT at my disposal lol Ihavent looked at what the hub in the center console is, I meant to say USB cables, I think one gling from hub to hub and one going to the APIM?
I've sorted through this thread about 800 times, and honestly the more I read the more I get confused lol my situation is a little unique but application is fairly straight forward.
I have a full 2018 base car interior swapped in my 94 GT. It has all of the modules from the s550 so for sake of...
You wont see improvement in the time, however you will see a substantial decrease in instances where your wheel hops, and a substantial increase in the rear end feeling planted to the ground while launching or cornering
Really the biggest issue with trying to do a video is that whipple is constantly revising their kits so if you made a video 3 years ago when the gen 5 came out, probably 60% of the components would be different at this point lol