2020+ Gt500 with BMR lowering springs

[Stephen@lethal]

So I've recently put the BMR front springs on my gt500 and currently foregoing on the rears until I see how everything settles to figure if they are needed or not.

Is there anyone out there on a 18in wheel with the BMR springs on the rear? Curious to see how they end up looking.

Sponsored

 

[Epiphany]

What is the spring rate on the fronts you swapped in?

 

[raceguy388]

car looks good ! What wheels are those?

 

[Stephen@lethal]

What is the spring rate on the fronts you swapped in?

250 lb/in front I believe is all they make at the moment.

 

[Stephen@lethal]

car looks good ! What wheels are those?

Thanks man, they are BC Forged. I can get you a set if you're ever interested.

 

[Epiphany]

250 lb/in front I believe is all they make at the moment.

That'd match the Base front rate anyway.

 

[Biggsy]

So I've recently put the BMR front springs on my gt500 and currently foregoing on the rears until I see how everything settles to figure if they are needed or not.

Is there anyone out there on a 18in wheel with the BMR springs on the rear? Curious to see how they end up looking.

Nice car man. I think that request is going to be tough. I have only seen one person who races their 500 run 18s I believe or maybe it was 19s. Obviously they swapped out the brakes for AP Racing stuff. Maybe the drag strip guys? but I would assume they would have stock or drag springs. Good luck on the search!

 

[Donkey]

Do you know what the height difference is between these and a cftp front spring? Looos similar from pics.

 

[Stephen@lethal]

Do you know what the height difference is between these and a cftp front spring? Looos similar from pics.

So I guess there are two heights for their springs and they share the same part numbers with the GT cars. for the GT cars its around a .75 in drop, however in the GT350 and GT500 its only a .30 in drop in the front and a .50 in drop in the rear.

If I'm not mistaken, the CFTP springs are more than that? Either way, the front is low enough for me, I don't scrape anything but if it went any lower I for sure would lol.

 

[Stang 19]

Doesn’t Magnaride need to be recalibrated when you modify the suspension?

 

[Epiphany]

In a theoretical world, yes. In reality, if you don't exceed the window the system operates within, no.

Sponsored