About Done With My 2021 Mach 1 Build - but Never say Done....Check it out !

[Luckystang]

Ever since buying my 2021 Mach 1 in September of 2021, my wife and I have been working on building it out to be as unique as possible while at the same time looking like everything could have come stock from the manufacturer. We found an awesome photographer over the weekend (Alec White), and with the exception of a few parts on back order, we are proud to share some pics of "Abbeygail" with everyone on this forum. We especially want to thank Dan, TJ, and Paul with Pro Dyno and John, Chris & Jamie with Steeda. We've listed all the parts we've added on one of the pics so check them out. On a very hot and human day, we dyno'd 693 horsepower and 532 torque in case you were wondering. We're looking forward to taking it to Myrtle Beach Mustang Week!

Sponsored

 

[SINBUSTER007]

looks good.
i would like to know how you got the shaker on the 1/18 scale....closeups?

 

[TonyNJ]

looks good.
i would like to know how you got the shaker on the 1/18 scale....closeups?

The 1/18 car needs the tow hook.

 

[SINBUSTER007]

^
too funny!

 

[MD18EcoStang]

Very nice. Enjoy Myrtle Beach!

 

[TonyNJ]

Ever since buying my 2021 Mach 1 in September of 2021, my wife and I have been working on building it out to be as unique as possible while at the same time looking like everything could have come stock from the manufacturer. We found an awesome photographer over the weekend (Alec White), and with the exception of a few parts on back order, we are proud to share some pics of "Abbeygail" with everyone on this forum. We especially want to thank Dan, TJ, and Paul with Pro Dyno and John, Chris & Jamie with Steeda. We've listed all the parts we've added on one of the pics so check them out. On a very hot and human day, we dyno'd 693 horsepower and 532 torque in case you were wondering. We're looking forward to taking it to Myrtle Beach Mustang Week!

Amazing car. You should be proud. Hope to see it in MB.

 

[murick]

@Luckystang the stripes over the roof and boot were matching the original one on the hood, or did you redo the whole striping? And which stripes did you use, the ones from Autodesign? (Got that one.)
The orange contours on the front mask are from Bemaro?

 

[kiksbutt]

The exhaust tips look crooked - should be easy fix.

 

[19gtMD]

That is a awesome looking Mach 1. I love the steering wheel personally.

 

[RobZ71LM7]

The exhaust tips look crooked - should be easy fix.

Yup easy fix, loosen the clamps on the x-pipe and put jacks under each muffler until visually aligned then tighten back down. That's how I aligned mine when I did the x-pipe.

 

[Codeblue009]

Ever since buying my 2021 Mach 1 in September of 2021, my wife and I have been working on building it out to be as unique as possible while at the same time looking like everything could have come stock from the manufacturer. We found an awesome photographer over the weekend (Alec White), and with the exception of a few parts on back order, we are proud to share some pics of "Abbeygail" with everyone on this forum. We especially want to thank Dan, TJ, and Paul with Pro Dyno and John, Chris & Jamie with Steeda. We've listed all the parts we've added on one of the pics so check them out. On a very hot and human day, we dyno'd 693 horsepower and 532 torque in case you were wondering. We're looking forward to taking it to Myrtle Beach Mustang Week!

Well done Mate!!!!! I am also sending my car to Steeda in a few weeks to get the special interior and exterior treatment. No Shaker Hood for me, since a stage 2 Whipple will be installed, and it is all warrantied. I see you stayed with the 19 inch rims. I opted to go to the 20 inch and keep the 19's with the Cup 2 for track days. Still, I love what you did to your Mach 1!!!!

 

[shogun32]

need to re-shoot a couple of those otherwise very nice photos so poles aren't sprouting out of the hood and other oopsies in the background framing.

 

[Vertex]

@Luckystang the stripes over the roof and boot were matching the original one on the hood, or did you redo the whole striping? And which stripes did you use, the ones from Autodesign? (Got that one.)
The orange contours on the front mask are from Bemaro?

If it hasn't been answered I believe so. Looks just like off their site and have been the only one I've seen so far, I just didn't see it listed on his sheet.

 

[Techapma]

OP-

is that a CMS roll bar?

and if it is, did they powder coat it orange or did you have it painted locally?

 

[Luckystang]

looks good.
i would like to know how you got the shaker on the 1/18 scale....closeups?

From a 1969 Mach 1 diecast

Sponsored