My Mach 1 Build

[Luckystang]

Here is my list of parts installed or waiting to be installed by the end
of January.
I am going to have a professional photographer take pics when all has been completed.
Hopefully by the first of February.

Factory Special order
2021 Ford Mustang Mach 1.
Mach 1 Handling Package
Mach 1 Appearance Package
Fighter Jet Gray
Interior 700A premium package
Rear seat Delete
10 Speed Automatic Trans

After Market
All work Completed By Pro dyno
Procharger P-1SC-1 Stage 2 Intercooled System 8.5 lbs
Intercooler Painted Gloss Black
Billet Oil Pump Gear
Billet Crankshaft Sprocket
Completed

NGK Spark Plugs LTR71X-11
ID1050X Injectors
JMS Boost A Pump Plug and Play
Pro-Dyno Custom Super Charge Tune
Ford Hood Strut Kit. Completed
Roll Bar Competition Motor Sports
Stainless Works Long Tube Headers
Stainless Works Performance Cats
Install date for the above items.
1/17/21

Ford Performance X Pipe. Completed


MMD by Foose
Quarter Window and side Scoops
Install and painted by custom Import
Completed

Michelin Sport Cup 4S
30x19x305 Front
30x19x325 Rear
Completed

Ford Performance Seat Belt Pads
Completed

Custom Floor and Trunk Mats
By Chuck Upholstery Stitch
Will be completed next week.

Install By BMF Performance
Custom Install Back seat Delete.
Will be installed 1/21.

Installed By Steeda
2021 Mustang Mach 1 Shaker Hood System
By Classic Design Concepts
Steeda IRS Subframe Support Brace
G-Trac Brace.
Will installed 1/24.
John at Steeda has been a big Help.

Not sure on Drive Shaft.
Waiting for more info from DynoTech.
Also looking at The drive shaft shop.

Custom Shift Knob
By white Madness Garage.

Sponsored

 

[Coastal-Mach]

Pics and videos please. What numbers did it put down?

 

[Luckystang]

I will send the pics out first of February when all has been completed.
I will post the dyno numbers when Headers, injectors, boost a pump
and custom tune is completed on 1/19.

 

[Atlas1]

Damn you’re not wasting any time! Looking forward to seeing your procharger numbers. Couple questions….you ordered your car with a rear seat delete? What is the custom rear seat delete you mentioned?
Also please post video of your exhaust with the catted headers and factory catback when you have time! Very interested in that but it’s hard to find videos of catted long tubes with stock mufflers

 

[seeyalater]

Can't wait to see pics! It's going to be one bad ass Mach 1

 

[Luckystang]

Atlas1, I will have Dan at Pro dyno make a video so i can post for you all.
The backseat delete will be custom fitted around the Roll Bar. It is squared off in the front,
When finished it will have the look of the fold down seats like in the 1965 fast back and up models.
I will post pics after install.

 

[Atlas1]

Atlas1, I will have Dan at Pro dyno make a video so i can post for you all.
The backseat delete will be custom fitted around the Roll Bar. It is squared off in the front,
When finished it will have the look of the fold down seats like in the 1965 fast back and up models.
I will post pics after install.

if possible any start up, idling, driving vids would be most appreciated! that car is going to be a lot of fun! which roll bar are you going with?

 

[Kobi Addiction]

Great list of modifications coming, looking forward to the photos

You chose wisely with the Stainless Works system. I have 38k miles running through mine and no signs of cracking, I inspect every 10k miles or so. SW and Steeda provide great customer service!

I see you're still on the fence with a DS. I run the QA1 Carbon (SFI) driveshaft and it has held the extra power well, no signs of fatigue. Just FYI.

 

[Luckystang]

Atlas1,
I order the Roll Bar from Competition Motor Sports. I had them powder coat it orange to match the fighter jet gray orange accents.

Kobi,
I just got off the phone with John at Steeda and also order the QA1 Carbon driveshaft.
Steeda will install on the 24th with all the other goodies.
I have been working with John for a few months now trying to get all the parts in.
Great guy and great company to work with.

 

[S550VIN54]

Atlas1,
I order the Roll Bar from Competition Motor Sports. I had them powder coat it orange to match the fighter jet gray orange accents.

Kobi,
I just got off the phone with John at Steeda and also order the QA1 Carbon driveshaft.
Steeda will install on the 24th with all the other goodies.
I have been working with John for a few months now trying to get all the parts in.
Great guy and great company to work with.

I have heard nothing but good things about the carbon fiber DS. I wanted to add one to my 12 boss but never did it. The Steeda guys are awesome! I was really close to doing the Chad McQueen Bullitt upgrade but ended up trading cars.

Look forward to seeing the Mach 1 when finished. I am just down the road.

 

[Fishtales]

I think a complete set of pics, several vids and a spread in a car mag are in order. Sounds like the complete package. Can't wait to see/hear more!

Sponsored