Raybestos ST-43 Brake Pads

[EuroKllr]

Anyone know where I can find the Raybestos ST-43 brake pads for front & rear?

Sponsored

 

[Tonymustang302]

In the trash bins, get pagids

 

[Ewheels]

KNSBrakes.com has them

 

[shogun32]

I could have sworn RockAuto had them too.

 

[honeybadger]

Unfortunately Raybestos is still way behind since their plant burned down a while back. I'm using my last set of pads up - I plan to switch to Cobalt brakes - have some friends running them and they appear to be a suitable replacement if you like the pad life/ability to modulate of the Raybestos.

 

[EuroKllr]

In the trash bins, get pagids

KNSBrakes.com has them

Which Pagids? Don't really want to spend that much but, if they are that good, then is guess so.

Contacted KNS Brakes, they said no dice on the Raybestos.

 

[EuroKllr]

I could have sworn RockAuto had them too.

Just checked, not listed as an option. Bummer

 

[Tonymustang302]

Call opmustang.com. I go to them first. They got my pads when everyone else was out.

they for sure have pagids in stock because i just got another set of front/rear and girodiscs front/rear

 

[EuroKllr]

Call opmustang.com. I go to them first. They got my pads when everyone else was out.

they for sure have pagids in stock because i just got another set of front/rear and girodiscs front/rear

Would you suggest RSL29 for front and rear?

 

[EuroKllr]

Unfortunately Raybestos is still way behind since their plant burned down a while back. I'm using my last set of pads up - I plan to switch to Cobalt brakes - have some friends running them and they appear to be a suitable replacement if you like the pad life/ability to modulate of the Raybestos.

Regarding the Colbalts, what front and rear pads is your friend using? Do they use them for the track and street, or just track?

 

[honeybadger]

Regarding the Colbalts, what front and rear pads is your friend using? Do they use them for the track and street, or just track?

XR3 I believe, stock rear pads still. Cars are driven to track, but they’re mostly a track car. That compound should be safe enough to drive on the street - just the usual racing compound issues of dust and noise.

 

[ShatterPoints]

Would you suggest RSL29 for front and rear?

I have RSL29's on the front. To my knowledge they don't make rears? KNS told me that it is a custom cut for the front pads already. I run stock in the rear and have not felt like I needed more.

 

[Tonymustang302]

I have RSL29's on the front. To my knowledge they don't make rears? KNS told me that it is a custom cut for the front pads already. I run stock in the rear and have not felt like I needed more.

they do make rears. I have them in my garage right now

Sponsored