What did you do to your S550 Mustang today?!

[MidwayJ]

ive been considering those. do you drill holes? how's the fitment/security of them? don't feel like they could be nudged off?

No drilling. (I just have the front so not sure about the rear.) Mostly you just pry out a couple plastic retainers and replace them with different ones from the kit. Then screw the splash guards into the new retainers. I suppose the retainers could pop out or break depending on the force involved but it seems doubtful it would happen in normal use.

Sponsored

 

[decableguy2000]

ive been considering those. do you drill holes? how's the fitment/security of them? don't feel like they could be nudged off?

You have to enlarge one hole on the rear, but no new holes. Have them on both the 16 and 20. Would purchase again for another car if needed.

 

[Rapid Red]

What about the diff? The 3.73 is one of the main reason the get a PP1

I did not know that PP1 had the 3.73 gear, interesting.

First oil change and unwrapped my new Forgestar CF10 19x10 gunmetal wheels

Took a look at them, those look nice, what's the car color?

 

[Matti777]

Took a look at them, those look nice, what's the car color?

Kona blue. I'll post pics once its all done.

 

[WD Pro]

I did not know that PP1 had the 3.73 gear, interesting.

it’s not just the ratio, it’s the Torsen too

WD

 

[Pat-Red-PP2]

Steeda brace,h-pipe,And lowering spring

 

[MNstang]

Installed the rear panel after blacking out the GT. I removed the panel and pulled off the GT - spray painted it with gloss black and reinstalled instead of buying a new emblem - turned out pretty well...

 

[Rapid Red]

it’s not just the ratio, it’s the Torsen too

WD

LMAO you'er a funny guy good one

 

[Rapid Red]

Steeda brace,h-pipe,And lowering spring

The right modes for sure, have a question..

*Does the car have jacking rails?

*Green rag blocking the view..

* Am I seeing the front sub frame bracket. Sandwiched between the body and the rail, can see the bolt does not go thru the rail.

Going to install these using a quick jack, just doing some homework.

Thank in advance

 

[BrandonATX]

Drilled holes in my trunk and installed the CDC Outlaw spoiler.

 

[Nate_V8]

Drilled holes in my trunk and installed the CDC Outlaw spoiler.

I really like that spoiler

 

[WD Pro]

*Does the car have jacking rails?

Going to install these using a quick jack, just doing some homework.

Looks like it

I am doing the same homework - looks like we have similar stuff to fit (IRS braces / Front brace / IRS support bushes / Diff bushes / IRS alignment bushes / H Pipe).

I went my own way with the jacking rails, I've not finished them yet :

WD

 

[Pat-Red-PP2]

The right modes for sure, have a question..

*Does the car have jacking rails?

*Green rag blocking the view..

* Am I seeing the front sub frame bracket. Sandwiched between the body and the rail, can see the bolt does not go thru the rail.

Going to install these using a quick jack, just doing some homework.

Thank in advance

Yes sir I have The Steeda jacking rail ,low profil,fit perfect!!

 

[Rapid Red]

Yes sir I have The Steeda jacking rail ,low profil,fit perfect!!

Not actually asking about the rail. Wondering if the rail & brace butt up against each other

 

[Pat-Red-PP2]

Not actually asking about the rail. Wondering if the rail & brace butt up against each other

Better pic,no separate ,zoom the photo you will see!!I will take a better pic tonight

Sponsored