Master rear spoiler thread -- Post yours here!

[MAGS1]

Need the group’s opinion, GT350 Track Pack spoiler or MMD V Series? I like them both and can’t decide between the two.

 

[S550_Stef]

Need the group’s opinion, GT350 Track Pack spoiler or MMD V Series? I like them both and can’t decide between the two.

Track pack in my opinion. the V Series has a good design but it sticks up and off too far for my liking.

 

[TicTocTach]

Looking to install a factory PP2 spoiler on my ‘18 EBPP spoiler delete car. Does anyone know if the factory PP spoiler mounting holes are the same as the PP2? Any other factory spoilers for that matter? Thinking of getting a spare trunk lid rather than drilling holes in my clean one.

 

[Sierra550]

Looking to install a factory PP2 spoiler on my ‘18 EBPP spoiler delete car. Does anyone know if the factory PP spoiler mounting holes are the same as the PP2? Any other factory spoilers for that matter? Thinking of getting a spare trunk lid rather than drilling holes in my clean one.

I went from a PP1 GT to a PP2 spoiler and the holes lined up perfectly.

 

[TicTocTach]

I went from a PP1 GT to a PP2 spoiler and the holes lined up perfectly.

Perfect, that’s what I was hoping to hear. I got a template with the PP2 spoiler (seller was converting to something more aggressive) and that was the implication I got from the instructions. Should be easy enough to find one of those trunks.

 

[Mustang Maverick]

CDC Outlaw
RPI Designs Painted
https://www.rpidesigns.com/shop/item.aspx?itemid=5431

Need to get a shorter antenna - The stock one catches on the spoiler.

 

[Mustang Maverick]

CDC Outlaw
RPI Designs Painted
https://www.rpidesigns.com/shop/item.aspx?itemid=5431

Need to get a shorter antenna - The stock one catches on the spoiler.

CDC shows as a 15-17, but fits on 18-20 as well.

Removal was pretty fast and easy.
Used 6 strands of fishing line tied and taped on 2 6" aluminum rods to saw through the tape and a couple of soft plastic trim tools to pry it off.
Used a drill attachment from LMR to remove the remaining tape fairly quick.
https://lmr.com/item/LRS-400E-KIT/adhesive-removal-tool

Install was a little tricky.
Holes in the truck and the screw holes did not quite match up.
Had to drill out the holes about 1/2" towards the middle and about 1/4" towards the rear of the trunk.
The included screws were very short and hard to thread.
Bought longer, but same size and thread (M6 x 1.00 x 25) bolts from Lowes; cut off the heads, and threaded them into the holes in the spoiler - creating a stud like the stock spoiler and allowed me to reuse the stock nuts.
Had to use a rubber washer and a metal washer due to the larger holes I drilled.
Used FlexiSeal Tape to cover the stock spoiler holes in the truck.

Hope this helps someone else in the future...

 

[Temovic55]

Wish someone could make a replica on that nasty look spoiler with the gurney flaps!! Or a least SHELBY sell them like the previous ones..

 

[Mustang Maverick]

Update
Bought the Stubby antenna on Amazon - Works great and fits correctly.
Bought a couple of less expensive antennas, but they did not work well or fit corrctly.

 

[Wernerj18]

$50 eBay special.

Got a link to it on ebay?

 

[JimsFury]

Wish someone could make a replica on that nasty look spoiler with the gurney flaps!! Or a least SHELBY sell them like the previous ones..

Where did you get the Gurney Flap?

 

[DonnieO]

Where did you get the Gurney Flap?

https://www.shelbystore.com/product-p/s550-spoiler.htm

https://www.shelbystore.com/product-p/spoilerh.htm

 

[JimsFury]

https://www.shelbystore.com/product-p/s550-spoiler.htm

https://www.shelbystore.com/product-p/spoilerh.htm

Thank you!

 

[S550-STEF]

The I5 autohaus Rear spoiler with gurney. Quality and fitment is pretty good. Not super crazy about using self tapping screws to keep the gurney on but time will tell if it holds.

 

[Voo Doo]

The screws..”should” hold as long as you don’t use the spoiler to,close the trunk!!