16Kobra
Well-Known Member
need to order new ones for the new car....kept my extension sleeves....Anyone who buys the kit should get the extension sleeves. I didn't and regret it.
Sponsored
need to order new ones for the new car....kept my extension sleeves....Anyone who buys the kit should get the extension sleeves. I didn't and regret it.
Yes, and there are specialty lugs so that you don't have to look at long pieces of stud sticking out.Iāll ask here While I go on line and start searching.
tried mounting the replica wheels today in the front. Iām using open ended lugs because of the long studs. My deep well impact socket is not deep enough to allow me to run the lugs all the way dow !!!! WTF!!!!!
what are you guys using? Are there extra deep well sockets ????
never had this issue before.
How long ago did you order your set? I sent them an email a few minutes ago asking if they were still sending a T60 when I realized they had shipped my order around 2pm!!!
Iād hate to have two of those T60 laying around. Like Tom said, Iāll probably never use it again.
I got the project 6GR replicas.
yep, those are the ones I have. Did you run them on the streets? Any severe damage on the calipers ?If youāre running 19ā 6GR you have minimal clear and between the barrel and your calipers. I had them on my car and rocks and debris alway got caught in that area. I wouldnāt even track with them due to that.
yep, those are the ones I have. Did you run them on the streets? Any severe damage on the calipers ?
Really annoyed with myself for not realizing that these were gonna have such tight clearances. I knew about the issue prior to purchase but I thought these were the ones WITHOUT that issue. The good thing about having wheels you donāt really like or care for is that you donāt care about them getting damaged haha.
You got pictures of your wheel setup?My rotors have marks and scratches on top from the clearance being so tight. Granted its just cosmetic but they should make GT350 owners aware of the tight tolerance and push these wheels on NON GT350 Mustangs. (Thats just my humble opinion though). I sold mine for cheap and went with a much better quality wheel set up.
On another note. The brake studs are going to make your life so much easier during brake changes. Have fun with the install.
You got pictures of your wheel setup?
i'm considering getting rid of these replicas for something with more clearance.
thanks for the well wishes, install should be a breeze, hardest part will be cleaning out the threads before installing the studs.
@Docscurlock , looking for another set of 6GRs?i'm considering getting rid of these replicas for something with more clearance.
Docscurlock is looking for some 6GRs?@Docscurlock , looking for another set of 6GRs?
@Alain , consider @50 Deep ās Signature Wheels for your R. Best bargain on the forum. Terence has exactly what you want.
I w
Yeah Iāll take some later. And if you like them Iāll put you in direct contact with my rep.
I donāt know but he bought a set off me last year. Heās got quite a stable so thatās why I tagged him.Docscurlock is looking for some 6GRs?