Sponsored

What WHP on 93?

CraigJ

Well-Known Member
Joined
Oct 28, 2018
Threads
19
Messages
337
Reaction score
327
Location
Wakefield, UK
Vehicle(s)
2016 Mustang GT, 97 Westfield SEW
Just wondering what WHP you guys are running on 93?

I’m currently at 632 on UK Shell 99 so equivalent of US 93.

I have a 16 GT with Edelbrock 2300 kit stock except a JMS BAP.

About to add the Edelbrock CAI and GT350 TB and drop to a 2.75” pulley from the stock 3”.

Car is tuned by PBD.

Car isn’t tracked just a fun road car/family car.

Just curious as to what others are seeing and what you have pushed too before seeing problems.
Sponsored

 

Ninjavitis

Well-Known Member
Joined
Jan 24, 2019
Threads
10
Messages
45
Reaction score
14
Location
Pa
First Name
Mark
Vehicle(s)
2015 GT, 18 GLA250 AWD, 05 Vette, 12 Hyundai Accent
Generally speaking, up to around 700rwhp is what you'll get out of 93 before E85 or other knock deter mods assuming you're injectors can keep up.
 

Roh92cp

Well-Known Member
Joined
Jun 27, 2015
Threads
79
Messages
2,895
Reaction score
1,169
Location
Fort Kent Maine
First Name
Shawn
Vehicle(s)
OW GTPP Whipple
There will a variance of course between different Superchargers and the way they’re setup. But one big factor in making peak HP from one calibration to another is what the rpm limit is set at and what the dyno operator pulls to. PBD often does 8k pulls and makes extra peak power form that.
 

Torinate

Well-Known Member
Joined
Feb 18, 2018
Threads
81
Messages
1,900
Reaction score
837
Location
Ontario
Vehicle(s)
2016 GT Convertible
Just wondering what WHP you guys are running on 93?

I’m currently at 632 on UK Shell 99 so equivalent of US 93.

I have a 16 GT with Edelbrock 2300 kit stock except a JMS BAP.

About to add the Edelbrock CAI and GT350 TB and drop to a 2.75” pulley from the stock 3”.

Car is tuned by PBD.

Car isn’t tracked just a fun road car/family car.

Just curious as to what others are seeing and what you have pushed too before seeing problems.
Can wait to see your numbers with these additions! Are you going to use the same injectors that came with the kit when you add these parts?
 

Sponsored

OP
OP
CraigJ

CraigJ

Well-Known Member
Joined
Oct 28, 2018
Threads
19
Messages
337
Reaction score
327
Location
Wakefield, UK
Vehicle(s)
2016 Mustang GT, 97 Westfield SEW
According to PBD the injectors are good for just over 700whp and are the same as what comes in the 13-14 GT500.

They have said with the BAP they will be ok.

Should have it all on next week I hope if I get the spare time.

Then book it in for a dyno run at the same place as least time.
 

cib24

Well-Known Member
Joined
Jul 3, 2019
Threads
26
Messages
424
Reaction score
175
Location
UK
Vehicle(s)
1999 Mazda RX-7 Type RS
Have you changed out your exhaust manifold and mid pipes or are you still running the stock exhaust system with the kinked RHD header?

You could also consider running Shell 99/ Tesco 99 and water injection and/or water/meth injection. Water alone will reduce the chance of det allowing for more boost, and water/meth basically alters the octane mix and increases it which allows for more boost AND timing.
 

Dominant1

Well-Known Member
Joined
Jun 17, 2016
Threads
94
Messages
3,737
Reaction score
1,127
Location
USA
First Name
Dr Frankenstang
Vehicle(s)
2016 gt/cs auto 3:55 gears
Vehicle Showcase
1
Pro charger D1x 750 whp 12lbs here with half a 16 oz bottle of Lucas
octane booster in every tankful.
 
Last edited:
OP
OP
CraigJ

CraigJ

Well-Known Member
Joined
Oct 28, 2018
Threads
19
Messages
337
Reaction score
327
Location
Wakefield, UK
Vehicle(s)
2016 Mustang GT, 97 Westfield SEW
Have you changed out your exhaust manifold and mid pipes or are you still running the stock exhaust system with the kinked RHD header?

You could also consider running Shell 99/ Tesco 99 and water injection and/or water/meth injection. Water alone will reduce the chance of det allowing for more boost, and water/meth basically alters the octane mix and increases it which allows for more boost AND timing.
Car is stock just the Edelbrock and BAP. 2018 active exhaust with valves open.

Always run on shell 99.

Have a few water/meth kits but for the Westfield. Might fit the larger kit to the GT but not tune for it.
 

ahl395

Well-Known Member
Joined
Dec 30, 2015
Threads
42
Messages
2,806
Reaction score
1,210
Location
NJ
First Name
Allan
Vehicle(s)
2017 Mustang GT, 2006 Infiniti G35X
Usually under 700 on 93.

Octane booster in each tank or Meth injection is the best way to gain more power on 93. I ran 12psi and 15-18deg timing on 93, after adding meth I run 15psi and 20-21deg timing. After I build the motor I am probably going to shoot for 16-18psi and more timing.
 

Sponsored

hossman

Well-Known Member
Joined
Feb 3, 2017
Threads
65
Messages
911
Reaction score
894
Location
NJ
Vehicle(s)
2021 Shelby GT500
I’m at 680whp on 93 on my 17 Mustang GT Roush 2300
 

Old Ickabod

Active Member
Joined
Mar 16, 2019
Threads
0
Messages
29
Reaction score
10
Location
49456
First Name
Chad
Vehicle(s)
2015 Mustang GT
807 on shell 93.....mods in signature.
 

Roh92cp

Well-Known Member
Joined
Jun 27, 2015
Threads
79
Messages
2,895
Reaction score
1,169
Location
Fort Kent Maine
First Name
Shawn
Vehicle(s)
OW GTPP Whipple

Old Ickabod

Active Member
Joined
Mar 16, 2019
Threads
0
Messages
29
Reaction score
10
Location
49456
First Name
Chad
Vehicle(s)
2015 Mustang GT

Roh92cp

Well-Known Member
Joined
Jun 27, 2015
Threads
79
Messages
2,895
Reaction score
1,169
Location
Fort Kent Maine
First Name
Shawn
Vehicle(s)
OW GTPP Whipple
 




Top